暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM CSE-735D4-668B 16GB DDR4 3200 ECC UDIMM kit memory upgrade

SKU CH-EX2V-R6CPP MPN CSE-735D4-668B

16 GB DDR4 3200 ECC UDIMM kit for SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit doubles system memory for heavier workloads
  • DDR4 3200 CL22 ECC corrects single-bit errors to protect data integrity
  • 2 V operation lowers power draw while maintaining rated speed
  • 288-pin UDIMM form factor fits Supermicro SYS-530A-IL and X12SAE-5 motherboards
  • 1Rx8 Samsung Micron Hynix chips validated under load for server-grade reliability

NEMIX RAM 16GB DDR4 ECC Kit

This NEMIX RAM CSE-735D4-668B kit provides 16GB of DDR4 3200 ECC unbuffered memory in a matched pair of 8GB modules. It is built for the Supermicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard.

Suited for ECC workstation upgrades

The kit suits administrators expanding memory in compatible Supermicro workstations that require ECC UDIMM modules. It is not for systems that need registered DIMMs, higher capacities per slot, or non-ECC consumer memory.

Straightforward UDIMM installation

Installation follows standard 288-pin DDR4 UDIMM procedure and typically takes minutes. Common issues include failing to seat both modules fully or mixing with existing memory of different rank or speed, which can prevent the system from posting.

特長

  • 16 GB dual-channel kit doubles system memory for heavier workloads
  • DDR4 3200 CL22 ECC corrects single-bit errors to protect data integrity
  • 2 V operation lowers power draw while maintaining rated speed
  • 288-pin UDIMM form factor fits Supermicro SYS-530A-IL and X12SAE-5 motherboards
  • 1Rx8 Samsung Micron Hynix chips validated under load for server-grade reliability

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

この商品に関する質問

Does this 16 GB kit require a motherboard with 288-pin DDR4 slots?

Yes, the two 8 GB modules use the 288-pin DDR4 UDIMM form factor and will only fit DDR4-compatible slots.

Will the CL22 timing work if I keep my existing 3200 MHz memory?

The kit runs at DDR4 3200 with CL22; mixing with other DDR4 3200 modules is possible but the system will operate at the slowest common timing.

How can I confirm the ECC function is active after installing the kit?

Enter the BIOS or use an OS tool such as dmidecode to verify that ECC is reported as enabled for the new 16 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。