暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM shape

NEMIX RAM

NEMIX RAM CSE-E302iL3 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-YVK9-PRKA2 MPN CSE-E302iL3

16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for Supermicro SYS-E302-13AD servers

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB capacity expands system memory for demanding workloads
  • DDR5 4800 MT/s speed delivers high data throughput
  • CL40 CAS latency supports responsive operation
  • 1 V voltage reduces power draw per module
  • 262-pin SODIMM form factor fits compatible Supermicro platforms

SuperMicro SYS-E302-13AD DDR5 SODIMM upgrade

This 16GB DDR5 4800 module is built for the SuperMicro IoT SuperServer SYS-E302-13AD and compatible X13SAV-PS platforms. It installs as a single 262-pin SO-DIMM running at 1.10V with CL40 latency. The unbuffered non-ECC design matches the server's supported memory specification.

IT teams maintaining SuperMicro IoT edge servers

Administrators who need a validated 16GB DDR5 stick for the SYS-E302-13AD will find this part number MS38400-618K1 a direct fit. Builders requiring ECC, registered DIMMs, capacities beyond 16GB, or memory for other platforms should look elsewhere.

Sustained operation in fanless edge chassis

The module uses major OEM Samsung, Micron or Hynix chips tested under load for stability in the SuperServer's thermal envelope. Unbuffered single-rank layout keeps signal integrity steady during continuous 4800 MT/s throughput. No heat spreader is fitted, relying on the system's airflow design.

特長

  • 16 GB capacity expands system memory for demanding workloads
  • DDR5 4800 MT/s speed delivers high data throughput
  • CL40 CAS latency supports responsive operation
  • 1 V voltage reduces power draw per module
  • 262-pin SODIMM form factor fits compatible Supermicro platforms

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Does my SuperMicro SYS-E302-13AD server need any other parts before I install this 16 GB DDR5 4800 SODIMM?

No extra parts are required; the module plugs directly into the 262-pin DDR5 SODIMM slot on the X13SAV-PS motherboard inside the SYS-E302-13AD.

Will this 1Rx8 CL40 1.1 V module run correctly with the existing memory already installed in my SuperMicro IoT SuperServer?

Yes, provided the installed modules are also DDR5 4800 non-ECC unbuffered SODIMMs; mixing ranks or speeds will force the system to run at the lowest common settings.

How can I confirm the new 16 GB stick is detected and running at 4800 MT/s after I power on the SYS-E302-13AD?

Check the POST memory summary or enter the BIOS; both will show 16 GB recognised at DDR5 4800 (PC5-38400) with CL40 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。