SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.0050167BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 256GB (4x64GB) 5600MHz CL46 ECC RDIMM memory upgrade
256 GB kit of four 64 GB DDR5 5600 MHz ECC RDIMM modules with CL46 latency and 1.1 V operation
- Capacity256GB (4 x 64GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB capacity in four 64 GB modules expands server memory headroom
- DDR5 5600 MHz speed with PC5-44800 bandwidth accelerates data throughput
- ECC registered design detects and corrects single-bit errors for data integrity
- 10 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits ASRock Rack GENOAD8X-2T/BCM motherboard
Server DDR5 ECC RDIMM kit
This NEMIX RAM kit provides 256GB of registered DDR5 memory across four 64GB modules. It is built for servers and workstations that require error-correcting code protection and registered signal integrity. The modules run at 5600MHz with a CL46 latency at 1.10V. Compatibility is validated for the ASRock Rack GENOAD8X-2T/BCM motherboard.
256GB capacity and 5600MHz headroom
Four dual-rank 2Rx4 modules deliver a total of 256GB, giving large memory headroom for virtualization, database caching and multi-tenant workloads. The PC5-44800 rating sustains high throughput while ECC corrects single-bit errors automatically. Registered buffering reduces electrical load on the memory controller, allowing stable operation at full population. Workloads exceeding 256GB or demanding lower latency than CL46 will need a different configuration.
Upgrade from smaller DDR5 RDIMM kits
This kit replaces lower-capacity registered DDR5 sets when the platform supports 64GB modules and the motherboard qualifies the part number MR44800-924K4. The jump is worthwhile when application memory pressure causes swapping or when consolidation ratios are limited by RAM slots. Systems already at the maximum supported capacity or requiring unbuffered memory cannot use this kit.
特長
- 256 GB capacity in four 64 GB modules expands server memory headroom
- DDR5 5600 MHz speed with PC5-44800 bandwidth accelerates data throughput
- ECC registered design detects and corrects single-bit errors for data integrity
- 10 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits ASRock Rack GENOAD8X-2T/BCM motherboard
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB (4 x 64GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Will the 5600MHz DDR5 ECC RDIMM modules run reliably alongside my existing 4800MHz DDR5 registered DIMMs?
The kit operates at 5600MHz PC5-44800 with CL46 latency and 1.1V. When mixed with slower DDR5 RDIMMs the system will downclock all modules to the lowest common speed and tightest supported timings; ECC and registered buffering remain active.
How can I confirm the 256GB quad-channel kit is detected and ECC is active after installation?
Enter the server BIOS or UEFI and verify that all four 64GB 2Rx4 modules appear at 5600MHz with ECC enabled. In the OS use dmidecode, lshw or Windows System Information to confirm 256GB total, registered DDR5 type and ECC status showing "Enabled".
Does the MR44800-924K4 package include only the four 288-pin RDIMMs or are any cables or brackets supplied?
The box contains the 256GB kit as four 64GB DDR5 5600MHz CL46 2Rx4 1.1V 288-pin ECC RDIMM modules. No cables, brackets, heatsinks or additional accessories are included.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
