BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00276429BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 256GB (8x32GB) 6400MHz CL52 1.1V ECC RDIMM Supermicro H13SRH
256GB kit of eight 32GB DDR5 ECC registered DIMMs at 6400MHz CL52 1.1V for Supermicro H13SRH servers
- Capacity256GB (8 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity lets you fill all eight slots with 32 GB modules
- DDR5-6400 speed transfers data at PC5-51200 bandwidth for demanding server workloads
- Registered ECC architecture buffers signals and corrects single-bit errors to protect data integrity
- 10 V operation at CL52 latency matches the motherboard's exact voltage and timing requirements
- 288-pin RDIMM form factor is the precise module type the Supermicro H13SRH memory controller expects
Exact-Match Server Kit
This NEMIX RAM kit delivers 256GB across eight 32GB DDR5 RDIMMs. Each module runs at 6400MHz with CL52 latency at 1.10V, using a 2Rx8 registered ECC design. The 288-pin form factor matches the Supermicro H13SRH motherboard requirements precisely.
Registered ECC Workloads
The registered architecture and ECC function suit virtualization hosts, database servers, and compute clusters that demand full-slot population and silent error correction. Systems requiring unbuffered UDIMMs, SODIMMs, or non-ECC memory cannot use this kit.
DDR5-6400 CL52 RDIMM
The 6400MHz CL52 2Rx8 registered specification is the single figure that determines compatibility with the H13SRH memory controller. Verify your motherboard manual supports this exact speed, rank, and voltage combination before installation.
特長
- 256 GB total capacity lets you fill all eight slots with 32 GB modules
- DDR5-6400 speed transfers data at PC5-51200 bandwidth for demanding server workloads
- Registered ECC architecture buffers signals and corrects single-bit errors to protect data integrity
- 10 V operation at CL52 latency matches the motherboard's exact voltage and timing requirements
- 288-pin RDIMM form factor is the precise module type the Supermicro H13SRH memory controller expects
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Will these 288-pin DDR5 RDIMMs fit the Supermicro H13SRH motherboard slots?
Yes, the kit uses the 288-pin Registered DDR5 form factor required by the H13SRH, so each module seats directly in the board's DDR5 DIMM slots.
What is the correct population order for the eight 32 GB modules on the H13SRH?
Follow the motherboard manual's approved DIMM population sequence; the kit's 2Rx8 registered design allows full capacity when every slot is filled in that order.
Do these registered ECC modules need any firmware updates or battery-backed maintenance later?
No firmware or battery maintenance is required; the ECC and registered architecture handles error correction in hardware for the life of the modules.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
