暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5-4800 32GB 2Rx16 ECC RDIMM 1.1V CL40 288-pin memory upgrade

SKU CH-AWZW-Y6Z4R

A 32 GB DDR5 ECC registered DIMM kit (2 × 16 GB) at 4800 MT/s with CL40 latency and 1.1 V, validated for the GIGABYTE MZ33-CP1 motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

他に 18点の構成を表示
  • 32 GB kit enables full-capacity server upgrades
  • DDR5-4800 speed matches platform specifications exactly
  • Registered ECC design corrects single-bit errors automatically
  • 1Rx8 1.1 V modules fit GIGABYTE MZ33-CP1 motherboard
  • 288-pin RDIMM form factor installs in standard server slots

Exact-Match DDR5-4800 RDIMM Kit

This 32 GB kit contains two 16 GB DDR5-4800 registered ECC modules built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. It is intended for server administrators who need guaranteed recognition at full capacity and rated speed without manual tuning.

Registered ECC Build With 288-Pin Form Factor

Registered architecture buffers the address and command signals so every slot remains stable when fully populated, while on-die ECC corrects single-bit errors before they reach the operating system. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not work in UDIMM or SODIMM slots.

Direct Replacement For Mismatched Or Missing DIMMs

This kit replaces modules that cause boot failures, capacity mismatches or silent data corruption when the memory population rules are not met. The upgrade is worth it when the system manual confirms DDR5-4800 1Rx8 registered ECC at 1.1 V and the board has two available 288-pin slots. Builders needing unbuffered memory, higher frequencies or larger per-module capacities should look elsewhere.

特長

  • 32 GB kit enables full-capacity server upgrades
  • DDR5-4800 speed matches platform specifications exactly
  • Registered ECC design corrects single-bit errors automatically
  • 1Rx8 1.1 V modules fit GIGABYTE MZ33-CP1 motherboard
  • 288-pin RDIMM form factor installs in standard server slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 rating does this 288-pin RDIMM kit use?

The kit is specified at DDR5-4800 with a PC5-38400 rating, matching the memory controller on the GIGABYTE MZ33-CP1 motherboard.

What physical slot and form factor are required for these 2Rx16 modules?

Each 16 GB module is a 288-pin DDR5 RDIMM; the motherboard must provide registered DIMM slots, not UDIMM or SODIMM sockets.

In which order should the two DIMMs be installed on the MZ33-CP1?

Consult the motherboard manual for the approved population sequence; the board's memory-population rules dictate which slots must be filled first for dual-channel operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。