暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 384GB 8x48GB ECC Registered RDIMM memory upgrade for Supermicro H13SRH

SKU CH-7588-A5KJK

384GB kit of eight 48GB DDR5 4800 CL40 registered ECC RDIMMs at 1.1V, matched for the Supermicro H13SRH motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 384 GB total capacity from eight 48 GB modules enables large-scale virtualization and in-memory databases
  • DDR5-4800 CL40 at 1.1 V delivers rated bandwidth with standard server voltage
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors for enterprise stability
  • 2Rx8 dual-rank organisation maximises density across all populated slots on the Supermicro H13SRH
  • 288-pin DDR5 form factor matches the motherboard's required slot type and population rules

System-specific DDR5 RDIMM kit

This 384 GB kit contains eight 48 GB DDR5-4800 registered ECC modules built for the Supermicro H13SRH motherboard. Each 288-pin RDIMM runs at 1.1 V with CL40 latency and a 2Rx8 organisation. The registered design lets every slot run fully populated at the rated 4800 MT/s speed.

Suited for max-capacity server builds

Ideal for administrators expanding a Supermicro H13SRH to its full 384 GB limit with matched, registered ECC memory. Not suitable for workstations or consumer boards that accept only unbuffered UDIMMs, nor for systems limited to lower-density modules or slower DDR5 speeds.

Deciding spec: registered ECC RDIMM

The modules are 288-pin DDR5 RDIMMs with on-die ECC and a registered buffer, the exact form factor the H13SRH memory controller requires. If your platform calls for UDIMM, SODIMM or non-ECC memory this kit will not fit or function.

特長

  • 384 GB total capacity from eight 48 GB modules enables large-scale virtualization and in-memory databases
  • DDR5-4800 CL40 at 1.1 V delivers rated bandwidth with standard server voltage
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors for enterprise stability
  • 2Rx8 dual-rank organisation maximises density across all populated slots on the Supermicro H13SRH
  • 288-pin DDR5 form factor matches the motherboard's required slot type and population rules

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I pick the 384GB 8x48GB kit or a different capacity for my Supermicro H13SRH?

The 384GB kit uses eight 48GB modules to fill all eight slots on the H13SRH. Choose this kit when you need the maximum supported capacity; select a smaller kit only if your workload does not require the full 384GB.

What does the DDR5-4800 CL40 rating deliver once installed in the server?

The modules run at 4800 MT/s with a CAS latency of 40 cycles at 1.10V. The registered buffer lets all eight slots operate at that rated speed without downclocking, while ECC corrects single-bit errors in real time.

How does the 288-pin RDIMM interface limit performance on the H13SRH?

The 288-pin RDIMM form factor is the only type the H13SRH accepts. It caps the kit to the DDR5-4800 (PC5-38400) data rate and CL40 timing the board's memory controller specifies.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。