暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 192GB 2x96GB CL40 1.1V 2Rx4 Supermicro X14SDV-20C-SP3F memory upgrade

SKU CH-HBGH-NDNDY

192GB DDR5 4800 ECC RDIMM kit (2×96GB, CL40, 1.1V, 2Rx4) validated for Supermicro X14SDV-20C-SP3F motherboards

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity from two 96 GB DDR5 modules
  • DDR5-4800 speed with CL40 latency runs at rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V low-voltage operation reduces server power draw
  • 288-pin RDIMM form factor fits Supermicro X14SDV-20C-SP3F motherboard

Exact-match server upgrade

This NEMIX RAM kit delivers 192GB of DDR5 memory in two 96GB modules, built to the 4800MHz PC5-38400 specification with CL40 latency and 1.1V operation. It targets administrators upgrading the Supermicro X14SDV-20C-SP3F motherboard where full-capacity recognition and rated speed depend on matching rank, voltage and timing precisely.

Registered ECC RDIMM form factor

Each 288-pin module uses a 2Rx4 registered architecture that buffers address and command signals, allowing every slot to run fully populated without overloading the memory controller. On-board ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads.

Lifetime replacement and US support

The package contains only the two RDIMMs; no heat spreaders, cables or software utilities are included. NEMIX RAM backs the kit with a lifetime replacement warranty and free US-based technical support, so any compatibility question or module failure is handled directly without third-party escalation.

特長

  • 192 GB total capacity from two 96 GB DDR5 modules
  • DDR5-4800 speed with CL40 latency runs at rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V low-voltage operation reduces server power draw
  • 288-pin RDIMM form factor fits Supermicro X14SDV-20C-SP3F motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed does the PC5-38400 rating cap the 2x96GB kit at in practice?

The PC5-38400 rating locks the kit to DDR5 4800 MT/s, so the 192GB kit runs at 4800MHz as specified for the Supermicro X14SDV-20C-SP3F motherboard.

Which physical form factor and pin count must the Supermicro X14SDV-20C-SP3F board accept for these modules?

The board requires 288-pin DDR5 RDIMM modules; this 2x96GB kit matches that exact registered form factor and will not fit UDIMM or SODIMM slots.

How are the two 96GB RDIMMs installed on the Supermicro X14SDV-20C-SP3F, and what step do people often miss?

Follow the motherboard manual's DIMM population order for registered ECC memory; the common mistake is skipping the prescribed slot sequence, which prevents the full 192GB from being recognised at DDR5 4800.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。