暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 64GB 4x16GB CL40 1Rx8 1.1V GIGABYTE MZ73-LM0 memory upgrade

SKU CH-XNP2-XR630

64 GB DDR5-4800 ECC registered RDIMM kit (4×16 GB, CL40, 1.1 V) validated for GIGABYTE MZ73-LM0 servers

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

他に 18点の構成を表示
  • 64 GB kit fills four slots for full capacity
  • DDR5 4800 CL40 at 1.1 V runs at rated speed
  • Registered ECC 1Rx8 corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches GIGABYTE MZ73-LM0 requirements
  • Major OEM Samsung Micron Hynix chips deliver enterprise stability

Server-grade DDR5 ECC RDIMM kit

This 64 GB kit contains four 16 GB DDR5-4800 registered ECC modules built to the exact rank, voltage and timing the GIGABYTE MZ73-LM0 motherboard expects. Each DIMM runs at 1.1 V with CL40 latency and a 1Rx8 organisation, so the memory controller recognises the full capacity at rated speed without manual tuning.

Thermals, noise and power draw

Operating at the standard DDR5 voltage of 1.1 V keeps power draw low per module, and the registered architecture reduces electrical load on the memory controller when all four slots are populated. No heat spreaders are fitted, so airflow across the bare PCBs handles the modest thermal output silently in a properly ventilated server chassis.

Build integration

The 288-pin RDIMM form factor matches the slots on the MZ73-LM0 and cannot be used in UDIMM or SODIMM sockets. Full population of four modules satisfies the board's registered-DIMM population rules, freeing no additional slots but delivering the maximum verified capacity in a single validated kit. Consult the motherboard manual for approved DIMM installation order before fitting.

特長

  • 64 GB kit fills four slots for full capacity
  • DDR5 4800 CL40 at 1.1 V runs at rated speed
  • Registered ECC 1Rx8 corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches GIGABYTE MZ73-LM0 requirements
  • Major OEM Samsung Micron Hynix chips deliver enterprise stability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 4x16GB DDR5 4800 RDIMM kit on the GIGABYTE MZ73-LM0 and what step is often missed?

Power off, open the chassis, and seat each 288-pin RDIMM in the exact slot order shown in the MZ73-LM0 manual; the step most often missed is confirming the population sequence for four 1Rx8 modules so the controller recognises the full 64GB at DDR5-4800.

What maintenance or replacement will the DDR5 ECC RDIMM kit need later?

No routine maintenance is required; the registered ECC design corrects single-bit errors on the fly, and if a module ever fails the lifetime replacement warranty covers a direct swap of the 16GB stick.

What limit appears first under sustained load with this DDR5 4800 CL40 1.1V kit?

The DDR5-4800 data rate and CL40 latency set the throughput ceiling; with all four slots populated at 1.1V the registered buffer keeps signal integrity, so the memory controller’s maximum supported bandwidth becomes the first bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。