暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin edge connectors, labelled 128GB each

NEMIX RAM

NEMIX RAM DDR5 5600 256GB (2x128GB) CL46 1.1V 2Rx4 ECC RDIMM Supermicro H14SHM memory upgrade

SKU CH-FCHQ-MHHMA

256 GB kit of two 128 GB DDR5 5600 CL46 1.1 V 2Rx4 ECC registered RDIMMs validated for the Supermicro H14SHM motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

他に 24点の構成を表示
  • 256GB capacity from two 128GB modules lets you fully populate the server
  • DDR5-5600 speed with CL46 latency matches the memory controller specification
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operating voltage and 2Rx4 rank align with the Supermicro H14SHM requirements
  • 288-pin RDIMM form factor fits the board slots without adapters or mismatches

Exact-match DDR5 kit for Supermicro H14SHM

This 256 GB kit contains two 128 GB DDR5 5600 RDIMMs built to the Supermicro H14SHM memory controller specification. Registered ECC with 2Rx4 organisation and CL46 timing at 1.1 V ensures the board recognises full capacity at rated speed. Major OEM Samsung, Micron or Hynix chips provide enterprise-grade stability.

Standard 288-pin RDIMM installation

Modules seat in the server's DIMM slots like any registered DDR5 RDIMM; no heat spreader is fitted so clearance is minimal. The critical step is following the motherboard manual for population order and maximum supported capacity per channel. Incorrect slot order or exceeding the board's validated configuration are the typical reasons a kit fails to post.

Suited for H14SHM memory expansion

Ideal for administrators expanding a Supermicro H14SHM platform that requires registered ECC DDR5 at 5600 MT/s in a 2Rx4 layout. Not appropriate for systems that need unbuffered UDIMMs, SODIMM form factors, lower voltages, different speeds, or non-ECC operation.

特長

  • 256GB capacity from two 128GB modules lets you fully populate the server
  • DDR5-5600 speed with CL46 latency matches the memory controller specification
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operating voltage and 2Rx4 rank align with the Supermicro H14SHM requirements
  • 288-pin RDIMM form factor fits the board slots without adapters or mismatches

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I confirm the kit is running at DDR5 5600 CL46 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should show 5600 MT/s and CAS latency 46 with both 128 GB modules detected for 256 GB total.

What comes in the box and is anything else required?

The box contains the 256 GB kit — two 128 GB 288-pin DDR5 RDIMMs. No extra parts are needed; the modules plug directly into the Supermicro H14SHM motherboard.

Why choose the 256 GB 2Rx4 CL46 version over other capacities?

This 2Rx4 registered ECC kit matches the H14SHM’s qualified population rules for full-capacity operation at 5600 MT/s and 1.1 V, which other ranks or speeds may not support.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。