暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 5600 256GB (8x32GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade

SKU CH-GQTA-6F7CS

256GB DDR5 5600 ECC registered RDIMM kit validated for Supermicro H14SST-G

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity across eight 32 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor ensures exact fit in Supermicro H14SST-G slots

256GB DDR5 ECC RDIMM kit for Supermicro H14SST-G

This 256GB kit contains eight 32GB DDR5 5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14SST-G motherboard expects. It targets administrators who need maximum supported capacity on this platform without guessing at population rules.

Replaces partial or mismatched memory configurations

A mixed-rank or UDIMM installation often forces the controller to down-clock or disable slots. This 2Rx8 1.1V CL46 kit matches the board's qualified spec so every slot runs at 5600MT/s with ECC active. The jump is worth it when you must fill all channels at full speed for virtualization or database workloads.

Verify DIMM population order

Consult the Supermicro H14SST-G manual for the approved slot sequence and per-processor memory limit before ordering. The board requires 288-pin RDIMMs; UDIMMs or SODIMMs will not fit. No heat spreader is included, so confirm airflow meets your chassis thermal design.

特長

  • 256 GB capacity across eight 32 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor ensures exact fit in Supermicro H14SST-G slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Will these 288-pin DDR5 RDIMMs fit the Supermicro H14SST-G motherboard slots?

Yes, the kit uses the 288-pin Registered DIMM form factor that the H14SST-G requires; UDIMM or SODIMM modules will not fit.

What population order should I follow when installing all eight 32 GB modules?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory controller expects a specific slot order to recognise the full 256 GB at DDR5-5600.

Do these registered ECC modules need any firmware updates or battery-backed maintenance later?

No firmware or battery maintenance is required; the modules are solid-state, and ECC error correction operates automatically during normal operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。