暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (4x96GB) ECC RDIMM CL46 1.1V Supermicro X14SDW-64CM-SP9F

SKU CH-WK15-61FTR

384 GB DDR5-5600 registered ECC kit with four 96 GB modules at CL46 and 1.1 V for the Supermicro X14SDW-64CM-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro X14SDW-64CM-SP9F
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation at 1.1 V enables full population across all 288-pin slots
  • Exact-match kit validated for the specified Supermicro motherboard memory population rules

NEMIX RAM DDR5-5600 384GB ECC RDIMM Kit

This NEMIX RAM kit provides 384GB of DDR5-5600 registered ECC memory across four 96GB modules. It is built for the Supermicro X14SDW-64CM-SP9F motherboard and runs at 1.1V with CL46 latency. The 2Rx4 registered design ensures full-capacity operation when all slots are populated.

Ideal for Supermicro X14SDW-64CM-SP9F upgrades

This kit suits administrators expanding a verified Supermicro X14SDW-64CM-SP9F platform to its maximum supported memory. It is not for systems requiring unbuffered UDIMMs, non-ECC modules, SODIMM form factors, or speeds other than DDR5-5600. Buyers with different motherboards must confirm compatibility before ordering.

288-pin RDIMM form factor decides fit

The modules use the 288-pin RDIMM interface required by the target Supermicro board. A UDIMM or SODIMM will not seat in these slots and the memory controller will not initialise. Verify your system manual calls for registered DDR5 RDIMMs before purchasing this kit.

特長

  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro X14SDW-64CM-SP9F
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation at 1.1 V enables full population across all 288-pin slots
  • Exact-match kit validated for the specified Supermicro motherboard memory population rules

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 384 GB kit contain and is anything else required?

The kit ships with four 96 GB DDR5 5600 RDIMMs. No extra modules or accessories are needed for installation.

Why choose this 384 GB kit instead of a smaller capacity?

It provides the exact 4 x 96 GB population the Supermicro X14SDW-64CM-SP9F expects for full-channel operation at DDR5 5600.

What does the DDR5 5600 rating mean once the modules are installed?

The memory controller will run the kit at 5600 MT/s with CL46 timing at 1.1 V, delivering the rated PC5-44800 bandwidth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。