暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules without heat spreaders in a tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (16x16GB) CL46 1.1V Supermicro H13SSH

SKU CH-8RS1-GRTZC

256GB kit of sixteen 16GB DDR5-5600 registered ECC RDIMMs at 1.1V CL46, validated for the Supermicro H13SSH motherboard

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Full 256 GB capacity with 16 matched 16 GB DDR5 modules
  • Registered ECC design corrects single-bit errors and keeps all slots stable at full load
  • DDR5-5600 CL46 at 1.1 V matches the memory controller's exact timing and voltage needs
  • 288-pin RDIMM form factor verified for the Supermicro H13SSH motherboard
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

Exact-match DDR5 server kit

This NEMIX RAM kit delivers 256GB across sixteen 16GB DDR5-5600 RDIMMs tuned to CL46 at 1.1V. It is built for administrators upgrading a Supermicro H13SSH platform that requires registered ECC modules in every slot.

Registered ECC RDIMM form factor

Each module uses a 288-pin registered design with 1Rx8 organization so the memory controller sees the correct electrical load. The board will not accept unbuffered UDIMMs or SODIMMs, and this kit matches the exact pinout and signalling the H13SSH expects.

Sustained enterprise stability

Registered buffering offloads the controller when all sixteen slots are populated, while on-die ECC corrects single-bit errors continuously during long-running workloads. The 1.1V operating point keeps power draw predictable under constant utilisation.

特長

  • Full 256 GB capacity with 16 matched 16 GB DDR5 modules
  • Registered ECC design corrects single-bit errors and keeps all slots stable at full load
  • DDR5-5600 CL46 at 1.1 V matches the memory controller's exact timing and voltage needs
  • 288-pin RDIMM form factor verified for the Supermicro H13SSH motherboard
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Will the DDR5 5600 speed run at its rated 5600 MT/s once all 16 modules are installed in the Supermicro H13SSH?

Yes, the kit is spec-matched to the board's memory controller so it is recognised at the full 256 GB capacity and operates at the rated 5600 MT/s when populated according to the manual.

Does the PC5-44800 rating limit the actual bandwidth I will see in this server?

PC5-44800 is the peak transfer rate for DDR5 5600; the registered buffer and ECC overhead are already accounted for, so sustained bandwidth matches the rated figure when all slots are filled.

What physical slot and clearance do these 288-pin RDIMMs need on the H13SSH?

They require standard 288-pin DDR5 RDIMM sockets; the modules have no heat spreader, so they fit the H13SSH's DIMM slots without extra height clearance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。