SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00500837BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 6400 128GB 2x64GB ECC Registered RDIMM Supermicro H14SSF memory upgrade
128 GB DDR5-6400 ECC registered RDIMM kit (2 × 64 GB, CL52, 1.1 V, 2Rx4) validated for Supermicro H14SSF motherboards
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.10V timing matches Supermicro H14SSF controller
- 128 GB (2×64 GB) 2Rx4 Registered ECC RDIMM fills every slot at full speed
- ECC plus registered buffering corrects single-bit errors and offloads the memory controller
- 288-pin RDIMM form factor is the precise module type the H14SSF requires
- Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability
Exact-fit DDR5 server upgrade
This 128GB kit contains two 64GB DDR5 6400 Registered ECC RDIMMs built to the Supermicro H14SSF motherboard's exact specifications. The modules run at PC5-51200 with CL52 latency at 1.1V using a 2Rx4 rank structure. Registered buffering and on-die ECC protect data integrity across every populated slot.
Verify board population rules first
Confirm the H14SSF manual for approved DIMM population order, maximum capacity per channel, and any BIOS revision requirements before installation. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit or function. Ensure all slots follow the board's specific population sequence for full recognition.
Replaces smaller or slower RDIMM kits
Upgrading from lower-capacity Registered ECC kits or slower DDR5 speeds is worthwhile when workloads demand full-channel population at rated frequency. The jump makes sense for virtualization hosts, database servers, or compute nodes that hit memory capacity limits or need the bandwidth headroom of PC5-51200.
特長
- Exact DDR5-6400 CL52 1.10V timing matches Supermicro H14SSF controller
- 128 GB (2×64 GB) 2Rx4 Registered ECC RDIMM fills every slot at full speed
- ECC plus registered buffering corrects single-bit errors and offloads the memory controller
- 288-pin RDIMM form factor is the precise module type the H14SSF requires
- Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Does the kit include anything besides the two 64 GB DDR5 6400 RDIMMs?
The package contains only the two 64 GB DDR5 6400 CL52 1.10 V 2Rx4 registered ECC RDIMMs; no heat spreaders, cables or tools are supplied.
When should I choose the 128 GB 2×64 GB kit instead of a smaller capacity?
Select this 128 GB kit when your Supermicro H14SSF configuration requires the maximum supported capacity per channel and you want both DIMMs matched for 2Rx4 registered ECC operation.
Will the modules run at DDR5 6400 CL52 automatically once installed in the H14SSF?
Yes, the kit is spec-matched to the board's memory controller so it is recognised at the rated DDR5 6400 speed, CL52 latency and 1.10 V without manual tuning.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
