SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497993BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 6400 256GB 4x64GB CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14SHM memory upgrade
256GB quad-channel kit of DDR5-6400 registered ECC RDIMMs at CL52 and 1.1V for Supermicro H14SHM servers
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from four 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput for H14SHM
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 10 V operation matches the board's memory controller specification exactly
- 288-pin RDIMM form factor ensures mechanical and electrical fit in Supermicro H14SHM
Exact-match DDR5 upgrade
This 256GB kit delivers four 64GB DDR5 6400 modules at CL52 and 1.1V. Registered ECC RDIMM construction matches the Supermicro H14SHM memory controller so the full capacity is recognised at rated speed.
Registered RDIMM daily impact
Registered buffering offloads the controller when every slot is populated, while ECC corrects single-bit errors before they cause corruption or reboots. The 288-pin RDIMM form factor is the only type this motherboard accepts, not UDIMM or SODIMM.
Pre-order configuration check
Server memory support varies by model. Consult the system or motherboard manual for approved capacities, DIMM population order and installation steps before purchase to ensure correct fitment.
特長
- 256 GB total capacity from four 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput for H14SHM
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 10 V operation matches the board's memory controller specification exactly
- 288-pin RDIMM form factor ensures mechanical and electrical fit in Supermicro H14SHM
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
What speed does the DDR5 6400 PC5-51200 interface actually run at on the Supermicro H14SHM?
The kit is rated for DDR5 6400 (PC5-51200) and will operate at that speed when the motherboard memory controller supports the full 6400 MT/s data rate.
Does the 288-pin RDIMM form factor fit the Supermicro H14SHM DIMM slots without adapters?
Yes. The modules are standard 288-pin registered RDIMMs, which is the exact form factor the H14SHM requires; no UDIMM or SODIMM adapter is needed.
What population order should I follow when installing all four 64 GB modules?
Install the four RDIMMs in the slot sequence specified in the Supermicro H14SHM manual; the board’s population rules determine which channels fill first for full 256 GB recognition.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
