SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497778BTC
在庫あり
NEMIX RAM
NEMIX RAM DDR5 6400 576GB (6×96GB) CL52 1.1V ECC RDIMM 2Rx4 Supermicro H14SHM memory upgrade
576 GB DDR5-6400 ECC registered RDIMM kit (6 × 96 GB, CL52, 1.1 V, 2Rx4) validated for Supermicro H14SHM motherboards
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB capacity from six 96 GB modules for large memory workloads
- DDR5 6400 speed rated at CL52 latency for high throughput
- 1 V operation reduces power draw at full load
- Registered ECC design corrects single-bit errors and supports full population
- 288-pin RDIMM form factor matches Supermicro H14SHM requirements
Exact-match DDR5 kit for Supermicro H14SHM
This 576GB kit contains six 96GB DDR5 6400 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14SHM memory controller expects. It is intended for administrators who need to populate every slot with registered ECC memory at full rated speed.
2Rx4 registered ECC at 1.1V
Each module is a 288-pin DDR5 RDIMM rated CL52 at 1.1V with on-die ECC and registered buffering. The 2Rx4 organisation and registered architecture let the board run all six slots fully populated without signal degradation.
Fills six slots on the H14SHM motherboard
The kit supplies the complete 576GB capacity in a single validated package, freeing you from mixing modules of different ranks or voltages. Verify the board's DIMM population order in the manual before installation to ensure correct channel mapping.
特長
- 576 GB capacity from six 96 GB modules for large memory workloads
- DDR5 6400 speed rated at CL52 latency for high throughput
- 1 V operation reduces power draw at full load
- Registered ECC design corrects single-bit errors and supports full population
- 288-pin RDIMM form factor matches Supermicro H14SHM requirements
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Will the DDR5-6400 speed run at its rated 6400 MT/s once installed in a Supermicro H14SHM?
Yes, the kit is spec-matched to the H14SHM memory controller, so all six 96 GB modules operate at the rated DDR5-6400 speed when populated per the board's population rules.
What does the PC5-51200 rating mean for actual bandwidth on this platform?
PC5-51200 indicates a peak transfer rate of 51 200 MB/s per module; the registered ECC design lets the H14SHM sustain that throughput across all populated slots.
Do the 288-pin RDIMM modules fit the H14SHM DIMM slots without adapters?
The 288-pin registered DIMM form factor matches the H14SHM slots exactly; no adapters or converters are needed.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
