暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 1TB (8x128GB) CL52 1.1V 4Rx4 Supermicro X14SRG-TF

SKU CH-FKNV-CBEW9

Eight 128 GB DDR5 ECC registered DIMMs deliver 1 TB at 6400 MT/s CL52 for the Supermicro X14SRG-TF

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

他に 4点の構成を表示
  • 1TB capacity with eight 128GB DDR5 modules for maximum server density
  • DDR5 6400 speed and PC5-51200 bandwidth for high-throughput workloads
  • Registered ECC with 4Rx4 rank offloads controller and corrects single-bit errors
  • 1V operation and CL52 latency match motherboard timing for stable full-population
  • 288-pin RDIMM form factor verified for Supermicro X14SRG-TF compatibility

System-Specific 1 TB DDR5-6400 Kit

This NEMIX RAM kit provides 1 TB of DDR5 ECC registered memory in eight 128 GB modules. It is built for the Supermicro X14SRG-TF motherboard and runs at 6400 MT/s with CL52 latency at 1.1 V. The 4Rx4 registered design lets the board run fully populated at rated speed without signal degradation.

Fitment and Population Rules

The modules suit administrators upgrading a compatible Supermicro platform that requires 288-pin RDIMMs with registered buffering and on-die ECC. Builders using consumer boards, laptops, or systems limited to unbuffered UDIMMs or SODIMMs cannot install this kit.

DDR5 6400 Registered ECC Specification

The decisive figure is the DDR5-6400 (PC5-51200) registered ECC 4Rx4 specification at 1.1 V. Only motherboards qualified for this exact speed, rank, voltage, and registered protocol will recognise the full 1 TB capacity and operate reliably.

特長

  • 1TB capacity with eight 128GB DDR5 modules for maximum server density
  • DDR5 6400 speed and PC5-51200 bandwidth for high-throughput workloads
  • Registered ECC with 4Rx4 rank offloads controller and corrects single-bit errors
  • 1V operation and CL52 latency match motherboard timing for stable full-population
  • 288-pin RDIMM form factor verified for Supermicro X14SRG-TF compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What slot type and pin count does the Supermicro X14SRG-TF require for this 1TB DDR5 kit?

The motherboard takes 288-pin DDR5 RDIMM modules; the kit supplies eight registered DIMMs that match that exact form factor.

What population order should I follow when installing all eight 128GB modules?

Consult the Supermicro X14SRG-TF manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first for full 1TB operation.

How can I identify a failed module in this 4Rx4 registered ECC kit for replacement?

Registered ECC reports correctable errors per DIMM in the system logs; match the reported slot to the physical module and swap that single 128GB stick.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。