暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 2TB 16x128GB CL52 1.1V 4Rx4 Supermicro X14QBH+ memory upgrade

SKU CH-5PKF-EA105

2TB DDR5 6400 ECC RDIMM kit with 16x128GB modules, CL52, 1.1V, 4Rx4 registered for Supermicro X14QBH+

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

他に 8点の構成を表示
  • 2TB total capacity from 16 modules of 128GB each
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design with 4Rx4 rank corrects errors on the fly
  • 1V operation matches the server memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro X14QBH+ motherboard

2 TB DDR5 6400 ECC RDIMM kit

This 2 TB kit contains sixteen 128 GB DDR5 6400 RDIMMs built for the Supermicro X14QBH+ motherboard. Each module is a 288-pin registered DIMM with ECC and a 4Rx4 organisation. The kit is designed for servers that need maximum registered memory capacity in every slot.

Sustained load behaviour with registered ECC

Registered buffering reduces electrical load on the memory controller so all sixteen slots can run continuously at 6400 MT/s without signal degradation. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs. The 1.1 V operating voltage keeps power draw stable under full population.

Verify DIMM population rules before ordering

The X14QBH+ motherboard has specific slot-filling sequences and maximum capacity limits per channel that must be followed for the kit to be recognised. Consult the board manual for the approved population order and any BIOS version requirements. Ensure the platform supports 4Rx4 registered modules at the full 2 TB density.

特長

  • 2TB total capacity from 16 modules of 128GB each
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design with 4Rx4 rank corrects errors on the fly
  • 1V operation matches the server memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro X14QBH+ motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

With 16 modules drawing 1.1 V each, how much heat and power should I expect when the server runs continuously?

Each 128 GB RDIMM operates at 1.10 V with a CL52 latency; the registered buffer reduces electrical load on the memory controller so all 16 slots can stay populated at DDR5 6400 without extra voltage, keeping thermals predictable in a properly cooled chassis.

What motherboard and firmware do I need so the 2 TB kit is recognised at full speed?

The kit is validated for the Supermicro X14QBH+ motherboard running DDR5 6400 (PC5 51200); the board must support 288-pin registered ECC RDIMMs and have a BIOS version that enables 4Rx4 population across all 16 slots.

Can I mix these 4Rx4 CL52 sticks with lower-rank DDR5 modules already installed in the same system?

Mixing ranks or capacities is not supported — the X14QBH+ requires identical 4Rx4 registered ECC RDIMMs in every populated slot to run the full 2 TB at the rated 6400 MT/s with ECC active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。