暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 1TB 8x128GB 6400MHz CL52 2Rx4 1.1V Supermicro H13SSW

SKU CH-A42Q-X1N7E

1 TB registered ECC DDR5 kit with eight 128 GB modules at 6400 MHz CL52 for the Supermicro H13SSW motherboard

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB DDR5-6400 capacity for memory-intensive server workloads
  • Registered ECC RDIMM architecture prevents data corruption under full load
  • 1 V operation matches Supermicro H13SSW voltage requirements
  • 2Rx4 rank configuration aligns with motherboard population rules
  • CL52 latency at 6400 MHz delivers rated throughput per module

1TB DDR5 ECC RDIMM kit for Supermicro H13SSW

This 1TB kit contains eight 128GB DDR5 6400MHz registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. It targets administrators who need maximum supported capacity on this specific motherboard without manual tuning.

DDR5 6400 registered ECC limits

The modules run at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V using a 2Rx4 organisation. Registered buffering allows all eight slots to be populated at rated speed, while ECC corrects single-bit errors on the fly. Mixing different ranks, voltages or speeds will prevent the system from reaching full capacity or rated frequency.

Installation notes for eight-slot population

Install all eight 288-pin RDIMMs following the motherboard manual's population order; the board requires registered DIMMs, not UDIMMs or SODIMMs. Common issues include seating modules incompletely, populating slots in the wrong sequence, or using a BIOS version that does not yet support the full 1TB configuration.

特長

  • 1TB DDR5-6400 capacity for memory-intensive server workloads
  • Registered ECC RDIMM architecture prevents data corruption under full load
  • 1 V operation matches Supermicro H13SSW voltage requirements
  • 2Rx4 rank configuration aligns with motherboard population rules
  • CL52 latency at 6400 MHz delivers rated throughput per module

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Should I buy this 1 TB kit of eight 128 GB modules or look for a different capacity?

The kit delivers 1 TB total using eight 128 GB RDIMMs. If your Supermicro H13SSW manual lists 128 GB registered DIMMs in its qualified-vendor list and you have eight free slots, this exact capacity will be recognised at full speed.

What does the 6400 MHz rating actually give me inside the server?

Each module runs at DDR5 6400 (PC5 51200) with CL52 latency at 1.1 V, so the memory controller can transfer data at the rated 6400 MT/s across all eight channels when the board is fully populated.

How does the 288 pin registered ECC interface limit what I can do?

The 288 pin RDIMM form factor only fits DDR5 registered ECC slots; it cannot be used in UDIMM, SODIMM or non ECC platforms, and the registered buffer lets the H13SSW run all eight slots at the full 6400 MT/s without signal degradation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。