暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM MD44800-328K2 64GB (2x32GB) DDR5 5600 CL46 1.1V 288-pin UDIMM memory upgrade

SKU CH-2WDN-1MT1Y

A 64 GB DDR5 kit with two 32 GB UDIMM modules rated at 5600 MT/s, CL46 and 1.1 V, validated for the Supermicro X14SAE-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB total capacity from two 32 GB modules for expanded multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • 1 V operation matches the motherboard's default voltage for stable compatibility
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F desktop board exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested at rated specifications

Exact DDR5 kit for Supermicro X14SAE-F

This 64GB kit (2 x 32GB) is built as a direct DDR5-5600 (PC5-44800) upgrade for the Supermicro X14SAE-F motherboard. It uses 288-pin unbuffered UDIMM modules with CL46 latency, 1.1V operation and 2Rx8 organisation. The matched rank, voltage and timing let the board recognise full capacity at rated speed.

Fits the board's UDIMM slots and population rules

The modules slot into the X14SAE-F's standard 288-pin DDR5 DIMM sockets as unbuffered non-ECC memory. No ECC server DIMMs or SODIMMs are required. Installing the pair fills two slots and leaves any remaining slots free for later expansion within the board's supported limits.

Replaces slower or smaller DDR5 on the same platform

Swapping out lower-capacity or lower-speed DDR5 modules with this kit raises total memory to 64GB at the board's native 5600 MT/s rate. The jump is worthwhile when the current configuration limits multitasking headroom or memory-bound workloads on this specific Supermicro platform.

特長

  • 64 GB total capacity from two 32 GB modules for expanded multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • 1 V operation matches the motherboard's default voltage for stable compatibility
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F desktop board exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested at rated specifications

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the CL46 latency hold steady when the kit runs at DDR5 5600 for long workloads?

The modules are tested at the rated CL46 timing, 1.10 V and 5600 MT/s, so latency remains at spec during sustained operation.

How much heat does the 64 GB kit produce when running all day without a spreader?

Operating at 1.10 V with standard DDR5 efficiency, the unbuffered UDIMMs generate minimal heat and rely on normal case airflow.

Must the motherboard be a Supermicro X14SAE-F for this 288-pin DDR5 kit to work?

The kit is validated for the Supermicro X14SAE-F; other boards need DDR5 UDIMM slots that support 5600 MT/s, 1.10 V, non-ECC, 2Rx8 modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。