暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM MR44800-724K4 512GB 4x128GB DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-MDRS-M1WPF

512 GB DDR5 5600 ECC RDIMM kit with four 128 GB modules, CL46 latency, 1.1 V, 2Rx4 registered design validated for Supermicro H14SHM motherboards

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC design prevents data errors under load
  • 288-pin RDIMM form factor built for Supermicro H14SHM
  • 2Rx4 rank layout matches server memory controller expectations

Exact-match server kit

This 512GB kit contains four 128GB DDR5-5600 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14SHM motherboard expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly.

Replaces mixed or undersized DIMMs

The jump is worth it when your current configuration uses smaller capacities, mixed ranks or unbuffered modules that prevent full population or force downclocking. This kit delivers the precise 2Rx4 1.1V CL46 specification required for stable operation at maximum supported density.

Suits H14SHM builders at scale

Ideal for administrators populating all available slots with validated Registered ECC memory for production workloads. Not for systems that require UDIMM or SODIMM form factors, boards limited to lower maximum capacities, or configurations that cannot accept 2Rx4 registered modules.

特長

  • 512 GB total capacity from four 128 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC design prevents data errors under load
  • 288-pin RDIMM form factor built for Supermicro H14SHM
  • 2Rx4 rank layout matches server memory controller expectations

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14SHM motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type the Supermicro H14SHM requires. UDIMM or SODIMM modules will not fit or work in this board.

What population order should I follow when installing the four 128 GB modules?

Install all four modules in the sequence specified in the Supermicro H14SHM manual; the board has specific DIMM population rules for full-capacity operation with 2Rx4 registered DIMMs.

Do these modules have a heat spreader that could need cleaning or replacement?

No, the modules are built without a heat spreader, so there is no spreader to clean, re-seat, or replace during the product's lifetime.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。