暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular silver battery pack with wire connector

NShi

NShi MC96G9 7.2V 8Wh 1100mAh Li-Ion RAID controller battery

SKU CH-8BKY-YG91P

7.2 V lithium-ion battery preserves RAID controller cache during power loss, compatible with HPE Smart Array P440 and P840 series

  • Battery TypeLithium Polymer
  • 2 V 8 Wh capacity protects RAID cache during power loss
  • 1100 mAh lithium-polymer cell delivers stable output for Smart Array controllers
  • Grade A cells with built-in circuit protection reduce leakage risk and extend service life
  • Direct replacement for part numbers MC96G9 750450-001 786761-001 815983-001 HSTNN-IS6A
  • Fits HPE Smart Array P840AR P440AR P840 P440 raid controllers

Compatible RAID Controller Battery

This replacement battery fits HP Smart Array P440, P440AR, P840 and P840AR RAID controllers. It supplies 7.2V and 8Wh capacity using lithium-ion cells. The unit matches part numbers MC96, MC96G9, 750450-001, 786761-001, 815983-001 and HSTNN-IS6A. It is designed for cache backup in supported Smart Storage controllers.

Cache Backup Duration Limits

The 1100mAh capacity determines how long write cache data is preserved during a power loss. Actual hold-up time depends on the controller model, cache size and system load. The battery connects only to the designated cache module socket on the listed controllers. No other interface or charging method is supported by this part.

Verify Controller Model Before Ordering

Confirm the exact Smart Array controller model installed in your server matches the supported list above. Check that the existing battery connector and mounting orientation correspond to the original part. Ensure the server firmware recognises the battery for cache protection functions. This battery does not fit controllers outside the specified P440 and P840 series.

特長

  • 2 V 8 Wh capacity protects RAID cache during power loss
  • 1100 mAh lithium-polymer cell delivers stable output for Smart Array controllers
  • Grade A cells with built-in circuit protection reduce leakage risk and extend service life
  • Direct replacement for part numbers MC96G9 750450-001 786761-001 815983-001 HSTNN-IS6A
  • Fits HPE Smart Array P840AR P440AR P840 P440 raid controllers

仕様

Battery TypeLithium Polymer

この商品に関する質問

Which part numbers does this 7.2 V 8 Wh battery replace?

It replaces MC96, MC96G9, 750450-001, 786761-001, 815983-001 and HSTNN-IS6A in HP Smart Array P840AR, P440AR, P840 and P440 controllers.

What runtime can I expect from the 1100 mAh capacity inside a RAID controller?

The 8 Wh pack powers the controller cache during a power loss long enough to flush data to disk; actual hold-up time depends on the controller load.

What connector standard does the MC96G9 use and what does it limit?

The pack uses the proprietary HP Smart Storage battery connector, which limits use to the listed P840AR, P440AR, P840 and P440 RAID controllers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。