暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dual-slot full-height graphics card, silver shroud, four DisplayPort outputs

NVIDIA

NVIDIA RTX PRO 5000 Blackwell 48 GB graphics card

SKU CH-H931-3P6N4

Workstation GPU with 48 GB GDDR7 ECC memory on a 512-bit bus, 14080 CUDA cores and 2064 AI TOPS for professional compute and rendering

  • Chipset ManufacturerNVIDIA
  • GPU SeriesRTX PRO 5000
  • GPURTX PRO 5000
  • ArchitectureBlackwell
  • CUDA Cores14080
  • Tensor Cores440
  • 48 GB GDDR7 memory with ECC protects large datasets
  • 14080 CUDA cores accelerate complex rendering and simulation workloads
  • 440 Tensor cores deliver 2064 AI TOPS for inference tasks
  • PCIe 5.0 x16 interface provides high bandwidth to the platform
  • Four DisplayPort 2.1b outputs drive multiple high-resolution displays

Professional workstation GPU with 48 GB GDDR7 ECC

The NVIDIA RTX PRO 5000 Blackwell 48 GB is a full-height dual-slot workstation graphics card built on the Blackwell architecture. It delivers 14080 CUDA cores and 440 tensor cores for AI and compute workloads. A 512-bit memory interface feeds 48 GB of GDDR7 with ECC. The board connects through PCIe 5.0 x16 and draws 300 W via a single 16-pin CEM5 connector.

Step up from cards with less VRAM or without ECC

Moving to this model makes sense when frame buffers on earlier cards limit scene complexity or when silent data corruption risks become unacceptable. The 48 GB capacity lets larger models and textures stay resident. ECC protection guards memory integrity during long renders or simulation runs. Four DisplayPort 2.1b outputs drive multiple high-resolution panels without additional hardware.

Steady output at 300 W under continuous load

The active cooler is rated to dissipate the full 300 W board power during extended sessions. Clock rates remain stable because thermal headroom is sized for sustained throughput rather than short bursts. Memory bandwidth stays consistent across the 512-bit bus when ECC correction is active. The dual-slot form factor fits standard workstation chassis without blocking adjacent slots.

特長

  • 48 GB GDDR7 memory with ECC protects large datasets
  • 14080 CUDA cores accelerate complex rendering and simulation workloads
  • 440 Tensor cores deliver 2064 AI TOPS for inference tasks
  • PCIe 5.0 x16 interface provides high bandwidth to the platform
  • Four DisplayPort 2.1b outputs drive multiple high-resolution displays

仕様

BrandNVIDIA
SeriesBlackwell
ModelPRO 5000 Blackwell 48G
Part NumberPRO 5000 Blackwell 48G
Chipset ManufacturerNVIDIA
GPU SeriesRTX PRO 5000
GPURTX PRO 5000
ArchitectureBlackwell
CUDA Cores14080
Tensor Cores440
Memory Size48GB
Memory Interface512-bit
Memory TypeGDDR7 with ECC
DirectXDirectX 12
OpenGLOpenGL 4.6
DisplayPort4x DisplayPort 2.1b
AI FeaturesAI TOPS: 2064
Card Dimensions (L x H)4.4 inches x 10.5 inches
Slot WidthDual Slot

この商品に関する質問

How much length and height clearance does the 4.4 by 10.5 inch dual-slot card need in my case?

The board measures 4.4 inches long by 10.5 inches high and occupies two expansion slots, so verify your chassis has at least that much clear space and two adjacent rear brackets.

What power connector must I plug into the 16-pin CEM5 socket and what wattage should the supply deliver?

Connect one PCIe CEM5 16-pin cable from a PSU rated for at least 300 W dedicated to the card; ensure the connector seats fully to avoid melted pins.

Will the GDDR7 memory with ECC require any periodic replacement or servicing?

The 48 GB GDDR7 ECC memory is soldered to the board and has no user-serviceable parts; no scheduled replacement is needed under normal operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。