暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm square cooling fan with two-pin connector

OEM Industries

OEM Industries 2410ML-05W-B60 60mm 24V 0.17A 2-pin CPU cooler

SKU CH-5VGY-FS55W

A 60 mm ball-bearing fan runs on 24 V at 0.17 A with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 60 mm fan fits compact CPU coolers
  • Ball bearing extends operational life
  • 24 V 0.17 A suits industrial power rails
  • Two-pin connector enables simple installation
  • NMB 6025 frame ensures reliable airflow

60 mm 24 V Ball-Bearing Fan

This new OEM Industries 2410ML-05W-B60 is a 60 mm square DC cooler with a 2-pin power connector. It draws 0.17 A at 24 V and uses a ball bearing for reliable rotation. The unit is supplied as a fan only without any LED lighting.

Suits 24 V Industrial or Inverter Cooling

Builders maintaining frequency converters or similar 24 V equipment will find this cooler a direct match. It is not intended for standard PC CPU sockets that expect PWM control or higher airflow. Buyers who need variable-speed headers or larger frame sizes should look elsewhere.

2-Pin 24 V Power Connector

The cooler terminates in a simple 2-wire 2-pin plug that delivers fixed 24 V power. No PWM signal wire is present so speed cannot be modulated by the host system. Verify that your target device provides a compatible 24 V 2-pin header before purchase.

特長

  • 60 mm fan fits compact CPU coolers
  • Ball bearing extends operational life
  • 24 V 0.17 A suits industrial power rails
  • Two-pin connector enables simple installation
  • NMB 6025 frame ensures reliable airflow

仕様

Model2410ML-05W-B60
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

この商品に関する質問

What power source and header does the 24 V 0.17 A 60 mm fan need to run?

The fan draws 0.17 A at 24 V DC and uses a 2-pin connector, so it must be fed from a 24 V supply or converter with a matching 2-pin header.

Will the 60 mm 2-pin fan fit the mounting holes of my existing 6025 cooler?

Yes, the 60×25 mm frame matches the standard 6025 mounting pattern, so it bolts directly onto the same four holes used by your current cooler.

How can I confirm the ball-bearing fan is spinning correctly after install?

With power applied, the blades should rotate smoothly without wobble or noise; a steady airflow from the exhaust side and a stable RPM reading in BIOS or monitoring software show it is working as intended.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。