暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square CPU fan with 3-pin connector

OEM Industries

OEM Industries 3106KL-04W-B59 CB1 80mm 12V 0.3A 3-Pin CPU Cooler

SKU CH-M7FH-56D6T

An 80 mm square case fan with ball bearing, 12 V .3 A draw and three-pin power connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80 mm square frame fits tight CPU spaces
  • 12 V, 0.3 A draw keeps power use low
  • ball bearing design extends operational life
  • three-pin connector enables speed monitoring
  • black finish suits clean build aesthetics

Compact 80 mm CPU cooler for low-profile builds

This OEM Industries cooler measures 80 mm square by 15 mm thick and runs on 12 V at 0.3 A through a three-pin connector. It is intended for small-form-factor systems or replacement fan mounts where a full-height tower will not fit.

Ball-bearing fan with modest airflow and low power

The ball bearing keeps friction low during continuous operation while the 0.3 A rating limits power consumption to a few watts. No LED lighting is fitted, so the unit stays visually neutral inside a chassis.

Replaces worn 80 mm three-pin fans in legacy

The jump is worthwhile when the original cooler has failed or become noisy and the mounting pattern matches the 80 mm square footprint. It does not suit builds that require PWM control, higher static pressure or larger heatsink surface area.

特長

  • 80 mm square frame fits tight CPU spaces
  • 12 V, 0.3 A draw keeps power use low
  • ball bearing design extends operational life
  • three-pin connector enables speed monitoring
  • black finish suits clean build aesthetics

仕様

Model3106KL-04W-B59
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

How do I install the 3106KL-04W-B59 cooler and which step is often missed?

Mount the 80mm fan using its four corner holes onto the heatsink or case bracket, then connect the 3-pin plug to the motherboard CPU_FAN header; the step often missed is securing all four screws evenly so the 15mm thick frame sits flat without vibration.

What maintenance will the 3106KL-04W-B59 need over time?

The ball-bearing fan should be cleaned with compressed air every few months to remove dust from the blades and the 80mm frame; if noise or speed drops, the entire 12V 0.3A unit is replaced as a single fan-only module.

What limit appears first when the 3106KL-04W-B59 runs under sustained load?

The fixed 12V 0.3A input caps the maximum airflow, so thermal headroom is reached before any bearing wear; the 3-pin connector also means speed cannot be PWM-controlled to extend that limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。