暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 40mm server fan with 4-pin connector

OEM Industries

OEM Industries 4028 1611FT-D4W-B86 40mm 12V 1.2A 4-pin CPU cooler

SKU CH-XMTH-6ZA5P

A 40 mm ball-bearing fan with a 4-pin connector runs at 12 V and 1.2 A for server cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 40 mm fan fits compact server builds
  • 12 V 1.2 A power delivers strong airflow
  • Ball bearing ensures long operating life
  • 4-pin connector enables precise PWM speed control
  • Turbo design moves more air at lower noise

Compact 40 mm server fan

The OEM Industries 4028 1611FT-D4W-B86 is a 40 mm turbo fan built for server and workstation environments where space is tight. It targets system integrators and IT professionals who need a direct replacement for legacy NMB 4028 coolers in 1U chassis or dense rack units.

Ball-bearing thermals and 12 V 1.2 A draw

A ball bearing supports continuous rotation while the 4-pin PWM connector allows the motherboard to regulate speed based on temperature. At 12 V the unit draws 1.2 A, delivering focused airflow without LED lighting or extra wiring.

Sustained load in restricted airflow

Under prolonged load the turbo impeller maintains pressure across restricted fin stacks typical of compact heatsinks. The absence of a heatsink in the package means builders must pair it with a compatible cold plate, and the 40 mm footprint limits use to boards with matching mounting holes.

特長

  • 40 mm fan fits compact server builds
  • 12 V 1.2 A power delivers strong airflow
  • Ball bearing ensures long operating life
  • 4-pin connector enables precise PWM speed control
  • Turbo design moves more air at lower noise

仕様

Model1611FT-D4W-B86
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

この商品に関する質問

How do I mount the 40 mm NMB 4028 turbo fan with its 4-pin connector?

Align the four screw holes on the 40 mm frame, secure the fan, then plug the 4-pin connector into the motherboard or server fan header so the PWM signal controls speed.

What maintenance will the ball-bearing 4028 fan need over time?

Ball bearings are sealed; expect only occasional dust removal from the blades and heatsink fins using compressed air.

At what point does the 1.2 A current draw become the limiting factor during continuous operation?

The 12 V, 1.2 A rating sets the maximum power envelope; sustained loads that demand more current will hit this electrical limit first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。