暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm square fan, 38mm thick, 2-pin 48V connector

OEM Industries

OEM Industries 4715KL-07W-B30 120mm 2-Pin 48V CPU cooler

SKU CH-ABMQ-JHDHK

120 mm 48 V 2-pin fan measuring 120×120×38 mm draws 0.21 A for inverter-driven cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Power Connector2 Pin
  • LEDNon-LED
  • 120 mm frame fits standard mounting holes
  • 38 mm thick body moves more air per revolution
  • 48 V 0.21 A rating suits industrial power rails
  • Two-pin connector simplifies wiring to inverter boards
  • Non-LED black housing keeps builds clean and professional

48V 120mm server fan

The OEM Industries 4715KL-07W-B30 is a 120mm DC square cooler rated for 48V and 0.21A. It is intended for technicians maintaining inverter-driven equipment or specialised server chassis that require a two-pin 12038 form factor. The black non-LED housing suits industrial environments where status lighting is not required. Buyers needing a standard PWM or three-pin header fan for a desktop motherboard should look elsewhere.

Two-pin 48V installation

The cooler terminates in a two-wire connector delivering 48V DC directly to the motor. Polarity must be observed because the plug is not keyed on all inverter boards; reversing the wires will prevent the fan from spinning. No mounting screws or adapters are included in the package, so installers must reuse existing hardware or source M4 fasteners separately. The 38mm thickness may interfere with adjacent components in tight 1U layouts.

Verify 48V DC source

Confirm that your chassis or inverter board supplies a dedicated 48V DC rail with at least 0.21A capacity before ordering. Standard ATX motherboards provide only 12V on fan headers and cannot power this unit. Check the physical clearance around the 120mm mounting pattern to ensure the 38mm depth does not foul nearby capacitors or ducting. Ensure the two-pin connector pinout matches your board’s header layout.

特長

  • 120 mm frame fits standard mounting holes
  • 38 mm thick body moves more air per revolution
  • 48 V 0.21 A rating suits industrial power rails
  • Two-pin connector simplifies wiring to inverter boards
  • Non-LED black housing keeps builds clean and professional

仕様

Model4715KL-07W-B30
ColorBlack
TypeFan only
Fan Size120mm
Power Connector2 Pin
LEDNon-LED

この商品に関する質問

How can I confirm the 4715KL-07W-B30 is running correctly after connecting it?

Verify the fan spins smoothly at 48V and draws approximately .21A without unusual noise or vibration.

What comes with the 4715KL-07W-B30 and what must I source separately?

The package contains the 120mm square cooler with 2-wire lead; mounting hardware, PWM controller or 48V power supply are not included.

Which 4715KL-07W-B30 variant should I choose for a 12038 form-factor slot?

This single model matches the 120*120*38 dimensions and 2-pin 48V specification for that slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。