暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square black 40mm fan with three wires

OEM Industries

OEM Industries AD0412HB-C52 40x20mm 12V .15A 3-Wire CPU Cooler

SKU CH-R97B-7DJ8X

A 40mm ball-bearing fan with a 3-pin connector runs at 12V and 0.15A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40×20 mm footprint fits tight chassis
  • Ball-bearing motor reduces wear for longer service life
  • 12 V 0.15 A draw keeps power demand low
  • Three-pin connector enables speed monitoring
  • ADDA-built fan delivers reliable airflow for small-form-factor cooling

Compact 40mm fan for tight builds

The AD0412HB-C52 is a 40mm square fan with a 20mm thickness designed to move air through small-form-factor chassis or low-profile heatsinks. It runs on 12V power and draws 0.15A through a standard three-pin connector.

Fits 40mm mounts and three-pin headers

This unit needs a 40mm mounting grid and a motherboard or controller header that supplies 12V on a three-pin plug. Ball-bearing construction keeps the rotor stable in any orientation, and the lack of LEDs leaves the build visually neutral.

Steady airflow under continuous duty

Ball bearings maintain consistent speed when the fan runs for long periods, avoiding the slowdown that sleeve bearings can develop over time. The fixed 12V input means output does not vary with PWM curves, so cooling stays predictable during sustained workloads.

特長

  • Compact 40×20 mm footprint fits tight chassis
  • Ball-bearing motor reduces wear for longer service life
  • 12 V 0.15 A draw keeps power demand low
  • Three-pin connector enables speed monitoring
  • ADDA-built fan delivers reliable airflow for small-form-factor cooling

仕様

ModelAD0412HB-C52
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

What is the maximum current the AD0412HB-C52 draws from a 12 V header under continuous load?

The fan is rated at 0.15 A on a 12 V supply, so the header must provide at least that much current.

How much acoustic noise and heat does the 40 mm ball-bearing fan produce when running 24/7?

The 40 mm ball-bearing design runs at a constant 12 V 0.15 A; expect a steady low hum and minimal heat output from the motor itself.

Which mounting holes or brackets must the motherboard or chassis already have for this 40x20 mm cooler?

The unit follows the standard 40 mm square mounting pattern, so the board or case needs matching 40 mm hole spacing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。