暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 40x20mm ball bearing fan with two-pin connector

OEM Industries

OEM Industries AD0412MB-C50 40x20mm Ball Bearing Fan

SKU CH-RMHF-T7EGE

A 40x20mm ball-bearing case fan running on 12V 0.08A with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 × 20 mm footprint fits tight chassis
  • Ball-bearing design extends operational lifespan
  • 12 V 0.08 A draw keeps power load low
  • Two-pin connector enables simple motherboard hookup
  • LED-free build avoids unwanted case lighting

Compact 40mm Cooling Fan

The OEM Industries AD0412MB-C50 is a square axial fan measuring 40 by 20 millimetres. It runs on 12 volts at 0.08 amps and uses a two-pin power connector. A dual ball-bearing design supports continuous operation in tight spaces such as small-form-factor cases or inverter enclosures.

Suited for Targeted Airflow Needs

Builders replacing a failed 40mm cooler or adding spot cooling to a constrained chassis will find this unit fits the mounting pattern. It lacks LED lighting and PWM control, so users who want variable speed curves or visual effects should consider other options.

Integrates with Minimal Wiring

The two-wire lead connects directly to a standard 12 volt header on a motherboard or fan controller. No additional adapters or software configuration are required. Its low current draw leaves ample headroom on the fan header for other components in the build.

特長

  • Compact 40 × 20 mm footprint fits tight chassis
  • Ball-bearing design extends operational lifespan
  • 12 V 0.08 A draw keeps power load low
  • Two-pin connector enables simple motherboard hookup
  • LED-free build avoids unwanted case lighting

仕様

ModelAD0412MB-C50
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

この商品に関する質問

What power header does the 2-pin connector on this AD0412MB-C50 plug into?

It connects to any standard 2-pin 12 V fan header on a motherboard or fan controller.

Will the 40 mm frame and 20 mm thickness fit in the same mounting holes as my older 4020 fan?

Yes, the 40x20 mm dimensions match the 4020 form factor, so existing screw holes line up.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Check the BIOS or monitoring software for a stable RPM reading from the 2-pin header and listen for smooth, quiet rotation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。