暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OEM Industries

OEM Industries AD0612HX-H93 60x15mm 3-Pin CPU Cooler

SKU CH-0J60-54EBB

A 60 mm hydraulic-bearing fan with a 3-pin connector runs at 12 V and 0.28 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • LEDNo
  • Hydraulic bearing for quieter operation
  • 60 mm frame fits compact builds
  • 12 V 0.28 A draws little power
  • 3-pin connector enables speed monitoring
  • 15 mm slim profile clears tight spaces

Compact 60mm cooler for tight builds

The OEM Industries AD0612HX-H93 is a 60 by 15 millimetre case fan with a hydraulic bearing and a three-pin power connector. It runs on 12 volts at 0.28 amps and has no LED lighting. The black frame fits standard 60 millimetre mounting holes in small-form-factor chassis or low-profile CPU coolers.

Replaces noisy or failed 60mm fans

This unit serves as a direct drop-in when an existing 6015 fan becomes loud, develops bearing rattle or stops spinning. The hydraulic bearing offers longer life than sleeve types at similar cost. The jump is worth it when the original fan uses a two-pin connector and the board provides a three-pin header for speed monitoring.

Suits repairers and compact-system builders

Technicians servicing legacy 60mm coolers or 1U server trays will find the pinout and voltage match common requirements. Builders needing PWM control, larger airflow, or RGB illumination should look elsewhere because this model provides fixed-voltage operation only.

特長

  • Hydraulic bearing for quieter operation
  • 60 mm frame fits compact builds
  • 12 V 0.28 A draws little power
  • 3-pin connector enables speed monitoring
  • 15 mm slim profile clears tight spaces

仕様

ModelAD0612HX-H93
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeHydraulic
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 60mm square frame fit a standard 60mm mounting pattern?

Yes, the 60mm square frame matches the common 60mm mounting hole spacing used on many small-form-factor boards and cases.

How do I connect the 3-pin connector to a 4-pin motherboard header?

Align the three pins with the outer three holes of the 4-pin header; the keyed tab prevents reversed insertion and the fourth pin remains unused.

When should the hydraulic bearing be checked or the fan replaced?

Hydraulic bearings are sealed; plan to replace the fan if noise increases or speed drops below specification after several years of continuous use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。