OEM Industries
OEM Industries BCB1012UH 9725 12V 3.84A 4-Wire CPU Cooler
A 100 mm ball-bearing fan with 4-wire PWM control runs at 12 V and 3.84 A for focused CPU cooling
- ColorBlack
- TypeFan only
- Fan Size100mm
- Bearing TypeBall
- Power Connector4 Wires
- LEDNo
- High airflow from 12 V 3.84 A turbo fan
- Reliable ball-bearing design for continuous operation
- Precise speed control via 4-wire PWM connector
- Compact 97×25 mm frame fits tight builds
- No LED lighting keeps the interior clean
Delta BCB1012UH 100mm CPU Cooler
This Delta BCB1012UH is a 100mm air cooler built around a 97x25mm turbo fan rated at 12V 3.84A. The four-wire PWM connector allows precise speed control from the motherboard. It suits builders who need a compact, high-airflow solution for standard CPU sockets.
4-Wire PWM 12V 3.84A Fan Integration
The unit draws 3.84A from a standard 12V CPU fan header and reports speed via the fourth wire. Ball-bearing construction supports continuous operation at elevated RPM. No RGB lighting or extra cables are included, so cable routing stays simple inside tight chassis.
For Compact High-Airflow Builds
This cooler fits users who prioritise raw airflow in a 100mm footprint and accept the acoustic profile of a turbo-spec ball-bearing fan. Builders needing silent operation, RGB aesthetics or a larger heatsink mass should consider alternative designs.
特長
- High airflow from 12 V 3.84 A turbo fan
- Reliable ball-bearing design for continuous operation
- Precise speed control via 4-wire PWM connector
- Compact 97×25 mm frame fits tight builds
- No LED lighting keeps the interior clean
仕様
| Model | BCB1012UH |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 100mm |
| Bearing Type | Ball |
| Power Connector | 4 Wires |
| LED | No |
この商品に関する質問
How much current does the 12V 3.84A fan draw at full speed?
The fan is rated at 3.84 A on the 12 V rail, so it will pull up to that current when running at maximum RPM.
What noise and heat should I expect from the 97 x 25 mm ball-bearing fan running continuously?
Ball bearings typically produce a steady mechanical hum and run warmer than fluid-dynamic types under 24/7 load.
Which motherboard header do I need to plug the 4-wire connector into?
A standard 4-pin PWM CPU fan header is required for power and speed control.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



