暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square 4-pin CPU cooler with ball bearing

OEM Industries

OEM Industries CHC8012BB-N-AH 80mm 4-Pin CPU cooler

SKU CH-0FT8-2ES5H

80 mm ball-bearing fan with 4-pin PWM control for server or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 80 mm frame fits tight server bays
  • 38 mm thickness delivers strong static pressure
  • 12 V 0.37 A draw keeps power use low
  • 4-pin connector enables precise PWM speed control
  • Ball bearing design extends operational lifespan

Compact 80 mm Server Fan

The OEM Industries CHC8012BB-N-AH is an 80 mm square fan with a 38 mm thickness designed for server and workstation chassis. It uses a ball bearing and a 4-pin PWM connector for speed control. The black frame houses a 12 V motor rated at 0.37 A. This unit is a fan only, without heatsink or LED lighting.

Direct 8038 Form-Factor Replacement

It fits the standard 8038 mounting pattern used in many 1U and 2U rack units. The 4-wire interface allows the system to regulate RPM based on thermal load, replacing older 3-pin models that run at fixed speed. The jump is worth it when the chassis BIOS or BMC expects PWM feedback for fan-fault detection.

Steady Airflow Under Constant Load

Ball-bearing construction maintains consistent rotational speed during continuous 24/7 operation in dense enclosures. The 4-pin control loop adjusts duty cycle without the stiction that can stall sleeve bearings after long idle periods. Sustained throughput stays stable because the bearing preload does not relax with temperature cycles.

特長

  • 80 mm frame fits tight server bays
  • 38 mm thickness delivers strong static pressure
  • 12 V 0.37 A draw keeps power use low
  • 4-pin connector enables precise PWM speed control
  • Ball bearing design extends operational lifespan

仕様

ModelCHC8012BB-N-AH
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

この商品に関する質問

Will the 80 mm by 38 mm frame fit my server chassis fan slot?

The cooler measures 80 mm square and 38 mm thick, so it fits any standard 8038 mounting cut-out.

How do I connect the 4-pin PWM lead correctly?

Plug the 4-pin connector into a 12 V PWM header; the fourth wire carries the speed signal that the board expects.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for years; replace the unit if noise rises or RPM drops below the rated 0.37 A draw.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。