暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 120mm fan with 38mm depth and two wires

OEM Industries

OEM Industries CNDC24B4-991 12038 24V 0.32A 7W CPU cooler

SKU CH-304G-4HA6X

A 120 mm square fan with ball bearings runs on 24 V at 0.32 A for server and inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • LEDNo
  • 24 V operation suits industrial and server power rails
  • Ball bearing design extends service life in continuous use
  • 120 mm × 38 mm frame fits standard 12038 mounting
  • 7 W draw keeps energy cost low in dense racks
  • Two-wire 12 cm lead simplifies inverter or PSU wiring

120 mm 24 V server fan

The OEM Industries CNDC24B4-991 is a 120 mm square cooling fan with a 38 mm frame depth. It runs on 24 V DC at 0.32 A and draws 7 W. The unit uses a ball-bearing motor and a two-wire power lead measuring 12 cm. No LED lighting is fitted.

Suits 24 V rack and inverter builds.

This cooler targets integrators working with 24 V server, inverter or industrial power systems where a 12038 form-factor fan is specified. Builders using typical desktop motherboards with 12 V three- or four-pin fan headers cannot connect or power this unit without external conversion.

Check voltage, connector

Verify that your chassis or power supply delivers a stable 24 V DC source and that the two-wire lead matches your wiring harness. Confirm the 120 mm square mounting hole spacing aligns with your equipment and that the 38 mm thickness clears adjacent components. Ensure ball-bearing acoustics meet your noise requirements.

特長

  • 24 V operation suits industrial and server power rails
  • Ball bearing design extends service life in continuous use
  • 120 mm × 38 mm frame fits standard 12038 mounting
  • 7 W draw keeps energy cost low in dense racks
  • Two-wire 12 cm lead simplifies inverter or PSU wiring

仕様

ModelCNDC24B4-991
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
LEDNo

この商品に関する質問

What power source must I already have to run the 24V 0.32A 7W fan?

You need a 24 V DC supply capable of at least 0.32 A to power the two-wire 12 cm lead.

Will the 12038 120*38 mm frame fit the same mounting holes as my existing 120 mm square fan?

Yes, the 120 mm square footprint matches standard 120 mm mounting patterns, so it aligns with the same screw holes.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Listen for smooth, steady rotation and feel consistent airflow from the 120 mm frame; the ball bearing should run quietly without rattling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。