暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black square 50mm fan with three wires

OEM Industries

OEM Industries D05X-12TSP 50mm Fan CPU Cooler

SKU CH-K7BD-XXVJ4

50 mm Nidec fan with 12 V 0.12 A three-wire power for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • LEDNo
  • NIDEC motor ensures reliable long-life operation
  • 50 mm frame fits tight small-form-factor builds
  • 12 V 0.12 A draws minimal power from the header
  • Three-wire connection allows motherboard speed monitoring
  • 5010 series design balances airflow and quiet running

Compact 50 mm Fan Cooler

The OEM Industries D05X-12TSP is a 50 mm square fan unit built around a NIDEC 5010 motor. It runs on 12 V at 0.12 A and connects through a standard three-wire lead. The assembly is sold as a fan only, without a heatsink or LED lighting, and arrives in new condition.

Suits tight enclosures and replacement jobs

This cooler fits small-form-factor cases and legacy boards that have a 50 mm mounting pattern. It will not serve builds that require a larger fan frame or a finned heatsink for higher thermal loads. Buyers needing PWM speed control should note the three-wire interface provides only voltage regulation.

Three-wire 12 V 0.12 A power spec

The 12 V 0.12 A rating and three-wire connector decide whether the cooler matches the header on your board. Confirm the header supplies 12 V and that the mounting holes align with a 50 mm square footprint before ordering.

特長

  • NIDEC motor ensures reliable long-life operation
  • 50 mm frame fits tight small-form-factor builds
  • 12 V 0.12 A draws minimal power from the header
  • Three-wire connection allows motherboard speed monitoring
  • 5010 series design balances airflow and quiet running

仕様

ModelD05X-12TSP
ColorBlack
TypeFan only
Fan Size50mm
LEDNo

この商品に関する質問

Will the 50 mm square frame fit my case fan mount?

The frame measures 50 mm on each side and 10 mm thick, matching a standard 5010 mounting pattern.

How do I connect the three-wire lead to a 12 V header?

Plug the 3-wire connector onto a 12 V fan header; the third wire carries the tachometer signal so the board can read speed.

When should I plan to replace the sleeve bearing?

Expect typical sleeve-bearing life of several years at 0.12 A; replace when noise rises or rpm drops noticeably.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。