暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 70mm square cooling fan 10mm thick two wires 2-pin connector

OEM Industries

OEM Industries D70BH-12A 70mm Ball Bearing CPU cooler

SKU CH-E7PM-N6P74

70 mm ball-bearing fan runs at 12 V drawing 0.25 A via a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Ball bearing design reduces friction for longer service life
  • 70 mm frame fits standard 7010 mounting holes
  • 12 V, 0.25 A draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • 10 mm slim profile suits tight chassis spaces

70 mm Ball Bearing Fan

The OEM Industries D70BH-12A is a 70 mm square frame fan with a 10 mm thickness. It uses a ball bearing and a two-pin 12 V connector drawing 0.25 A. The unit is supplied as a fan only without integrated LEDs or a heatsink assembly.

Compact 7010 Form Factor

This fan suits builds that need a 70 mm by 70 mm footprint and a two-wire power connection. It is not for setups that require PWM speed control or a three-pin header. Buyers needing a larger frame or integrated lighting should look at other models.

Two-Pin 12 V Connector

The cooler connects via a standard two-pin header delivering 12 V at 0.25 A. This single specification decides whether the fan matches the motherboard or controller you are using.

特長

  • Ball bearing design reduces friction for longer service life
  • 70 mm frame fits standard 7010 mounting holes
  • 12 V, 0.25 A draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • 10 mm slim profile suits tight chassis spaces

仕様

ModelD70BH-12A
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

この商品に関する質問

What 2-pin connector standard does the D70BH-12A use and what voltage does it draw?

The cooler uses a 2-pin connector and runs at 12 V drawing 0.25 A.

Will the 70 mm by 10 mm frame fit my motherboard's mounting holes?

The fan measures 70 mm square and 10 mm thick, matching standard 7010 mounting patterns.

How do I install the ball-bearing fan and what step is often missed?

Align the four screw holes, secure with screws, then plug the 2-pin header onto the board's CPU fan connector.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。