暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm square frame cooling fan with four wire connector

OEM Industries

OEM Industries DV12038B48H 120mm 2 Ball 48V .95A 4 Pin Fan

SKU CH-W29R-HJM8N

A 120mm dual-ball-bearing fan running on 48V with a 4-pin thermistor control

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing Type2 Ball
  • Power Connector4 Wires
  • LEDNo
  • 48 V operation enables high-voltage industrial cooling systems
  • Dual ball bearing design extends operational lifespan under continuous load
  • 120 mm frame fits standard server and workstation mounting points
  • Four-wire PWM connector allows precise speed control via thermistor feedback
  • .95 A current draw delivers strong airflow with efficient power use

120 mm 48 V dual-ball bearing fan

This 120 mm cooling fan operates on a 48 V supply and draws 0.95 A through a four-wire connector. The dual-ball bearing design targets systems that need reliable airflow at higher voltage rails. It is intended for technicians who service industrial or server-grade CPU air coolers requiring this specific electrical profile.

Dual-ball bearing and four-wire control

Two ball bearings reduce friction and extend service life compared with sleeve alternatives, supporting continuous duty in demanding thermal environments. The four-wire interface carries power, ground, speed reporting and PWM control, allowing the host system to modulate fan speed based on temperature feedback from the onboard thermistor.

Fan-only package with thermistor feedback

The box contains the fan unit alone; no mounting brackets, screws or adapters are included, so installers must reuse or source compatible hardware. The integrated thermistor enables automatic speed regulation without external sensors, simplifying wiring in replacement scenarios. Buyers who need a complete cooler assembly or low-voltage 12 V operation should look elsewhere.

特長

  • 48 V operation enables high-voltage industrial cooling systems
  • Dual ball bearing design extends operational lifespan under continuous load
  • 120 mm frame fits standard server and workstation mounting points
  • Four-wire PWM connector allows precise speed control via thermistor feedback
  • .95 A current draw delivers strong airflow with efficient power use

仕様

ModelDV12038B48H
ColorBlack
TypeFan only
Fan Size120mm
Bearing Type2 Ball
Power Connector4 Wires
LEDNo

この商品に関する質問

Does the 4-pin connector support PWM speed control and tachometer feedback?

Yes, the four-wire interface provides PWM control and a tachometer signal so the motherboard can regulate speed and monitor RPM.

Will the 120 mm frame and 38 mm thickness fit standard 120 mm mounting holes?

The fan uses the common 120 mm square frame with 38 mm depth, matching typical 120 mm case and radiator mounting patterns.

How do I connect the four wires correctly, and what mistake should I avoid?

Plug the 4-pin header into a PWM fan socket aligning the key; do not force it into a 3-pin header or you will lose speed control.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。