暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square CPU cooler fan with 4-pin connector

OEM Industries

OEM Industries EFB-08E12H 8025 80mm 12V .20A 4-Pin CPU Cooler

SKU CH-D5SG-W5B36

An 80 mm ball-bearing fan with a 4-pin connector runs at 12 V and 0.20 A for case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 80 mm fan fits tight case spaces
  • Ball bearing extends operational lifespan
  • 12 V .20 A draw keeps power use low
  • 4-pin connector enables PWM speed control
  • Brushless DC motor runs quietly

80mm 4-Pin CPU Cooler

The OEM Industries EFB-08E12H is an 80mm DC brushless fan built for case and CPU cooling. It runs on 12V at 0.20A and uses a 4-pin power connector. The black housing contains a ball bearing for durable operation. No LED lighting is included.

Suits compact builds; not for high-TDP

This cooler fits small-form-factor cases that accept an 80mm 4-pin fan. It works for low-heat CPUs and general chassis airflow. Builders targeting high-TDP processors or quiet-focused systems should look at larger heatsink assemblies with greater thermal capacity.

4-pin PWM control decides fit

The 4-pin connector enables PWM speed control from a compatible motherboard header. Verify that your board provides a 4-pin CPU fan header before purchase. If only 3-pin voltage control is available, speed regulation will be limited.

特長

  • 80 mm fan fits tight case spaces
  • Ball bearing extends operational lifespan
  • 12 V .20 A draw keeps power use low
  • 4-pin connector enables PWM speed control
  • Brushless DC motor runs quietly

仕様

ModelEFB-08E12H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

この商品に関する質問

Will the 80 mm frame fit my case fan mount?

The cooler uses an 80 mm square frame, the standard 8025 footprint, so it matches any case or heatsink bracket cut for an 80 mm fan.

How do I connect the 4-pin power connector correctly?

Align the keyed 4-pin plug with the motherboard CPU_FAN header; the notch forces the right orientation, and the 12 V 0.20 A draw is within every standard header limit.

When should I replace the ball-bearing fan?

Ball bearings typically run for years; replace the unit if the fan develops audible rumble, vibration, or stops spinning at the rated 12 V supply.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。