暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 40mm square cooling fan 10mm thick 3-pin connector

OEM Industries

OEM Industries FD1240-A2033A 40mm 12V 0.11A 3-pin CPU cooler

SKU CH-JKWZ-BN87N

40 mm square cooling fan runs on 12 V at 0.11 A with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Power Connector3 Pin
  • LEDNo
  • Compact 40 mm footprint fits tight chassis
  • 12 V, 0.11 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Black square frame suits clean builds
  • Fan-only design targets spot-cooling needs

Compact 40mm Fan for Tight Builds

This 40mm square fan fits small-form-factor cases and legacy CPU coolers where larger units cannot be mounted. It targets system integrators and hobbyists who need a direct 12V replacement for noisy or failed original equipment.

Low-Profile Frame with Standard 3-Pin Lead

The 10mm-thick black frame uses a three-wire 3-pin connector that plugs straight into most motherboard headers without adapters. No LED lighting keeps the unit visually neutral inside windowed or closed chassis.

12V 0.11A Draw Defines Header Compatibility

Rated at 12 volts and 0.11 amps, the motor stays within typical 1A fan-header limits so it will not trip protection circuits. Builders needing higher airflow or PWM speed control should look elsewhere.

特長

  • Compact 40 mm footprint fits tight chassis
  • 12 V, 0.11 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Black square frame suits clean builds
  • Fan-only design targets spot-cooling needs

仕様

ModelFD1240-A2033A
ColorBlack
TypeFan only
Fan Size40mm
Power Connector3 Pin
LEDNo

この商品に関する質問

What does the 3-pin connector limit for speed control?

The 3-pin connector supplies 12V power and a tachometer signal; it does not carry a PWM line so the motherboard can only adjust speed by varying voltage.

What clearance does the 40mm square frame need?

The fan measures 40mm by 40mm with a 10mm thickness, so the mounting surface must provide at least that footprint and depth.

How do I orient the three wires when plugging it in?

Align the keyed 3-pin plug with the motherboard header — ground, 12V, and tach pins match the connector shape so it only fits one way.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。