暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OEM Industries

OEM Industries GM0502PFV2-8 25mm 5V CPU cooler

SKU CH-WPEB-0FDMA

A 25 mm square 5 V fan with maglev bearing and two-pin connector draws .4 W

  • ColorBlack
  • TypeFan only
  • Fan Size25mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • 5V power simplifies low-voltage builds
  • Maglev bearing reduces friction and noise
  • 25 mm square frame fits tight spaces
  • 4 W draw keeps energy use minimal
  • 2-pin connector enables direct DC connection

Compact 5 V cooler for space-limited builds

The OEM Industries GM0502PFV2-8 is a 25 mm square fan cooler powered from a 5 V two-pin header. It suits small-form-factor PCs, embedded boards or any chassis where a standard tower cooler cannot fit. Buyers who need more airflow or a larger heatsink should look elsewhere.

Maglev bearing maintains steady airflow

The maglev bearing reduces friction so the fan keeps its speed during continuous operation without the wear that degrades sleeve bearings over time. At 0.4 W the motor draws minimal current, so output stays consistent even when the system runs for long periods.

Low power draw keeps thermals simple

Because the unit consumes only 0.4 W at 5 V, it adds negligible heat to the case and does not strain the motherboard header. The 10 mm thin profile leaves clearance for nearby components while the maglev design runs quietly at typical speeds.

特長

  • 5V power simplifies low-voltage builds
  • Maglev bearing reduces friction and noise
  • 25 mm square frame fits tight spaces
  • 4 W draw keeps energy use minimal
  • 2-pin connector enables direct DC connection

仕様

ModelGM0502PFV2-8
ColorBlack
TypeFan only
Fan Size25mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

この商品に関する質問

How much heat does the 0.4 W fan add when it runs continuously?

The fan draws 0.4 W at 5 V, so it contributes less than half a watt of heat to the chassis.

What power source and header does the 2-pin connector need?

It requires a 5 V DC supply and a standard two-pin fan header on the motherboard or controller.

Will the 25 mm frame fit alongside taller coolers in a tight build?

At 25 mm square and only 10 mm thick, it slots into narrow gaps beside larger heatsinks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。