暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 50mm notebook blower fan with 3-pin connector

OEM Industries

OEM Industries HY50C-05A 50mm 5V CPU cooler

SKU CH-J1PM-YAM23

A 50 mm blower fan with ball bearing and three-pin 5 V power for notebook cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • 50 mm fan fits compact notebook chassis
  • 5 V 0.13 A draw keeps power use low
  • ball bearing reduces wear for longer life
  • three-pin connector reports speed to the system
  • blower design directs airflow across tight heatsinks

50 mm 5 V blower fan for notebook cooling

The OEM Industries HY50C-05A is a 50 mm square blower fan designed to draw 5 V at 0.13 A through a three-pin connector. It is intended as a replacement cooler for notebooks and similar compact devices where a low-profile radial airflow is required.

Direct three-pin swap with ball-bearing motor

Installation consists of disconnecting the original fan and plugging the three-pin header into the same socket. The ball-bearing design reduces the risk of sleeve-bearing wear, but the thin 10 mm profile leaves little margin for misalignment, so the mounting screws must be seated evenly to avoid vibration.

Fits tight laptop chassis needing radial exhaust

This cooler suits repair technicians or owners replacing a failed 50 mm blower in a space-constrained notebook. Builders who need a larger heatsink assembly, PWM speed control, or a standard axial case fan should look at other form factors.

特長

  • 50 mm fan fits compact notebook chassis
  • 5 V 0.13 A draw keeps power use low
  • ball bearing reduces wear for longer life
  • three-pin connector reports speed to the system
  • blower design directs airflow across tight heatsinks

仕様

ModelHY50C-05A
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin

この商品に関する質問

How can I confirm the HY50C-05A is spinning correctly after installing it in my notebook?

Connect the 3-pin connector to the motherboard header, power on the system and verify the fan rotates; the ball bearing should run smoothly at 5 V and 0.13 A.

What components are included with the HY50C-05A and what must I source separately?

The package contains the 50 mm blower fan with its 3-wire 3-pin lead; mounting screws, thermal paste or a heatsink base are not included and must be purchased if required.

Which version of the HY50C-05A should I choose for a 5 V notebook fan header?

Select the HY50C-05A model rated at 5 V 0.13 A with a 3-pin connector; it matches the voltage and pin-out of standard notebook blower headers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。