暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm square Maglev fan with three-pin connector

OEM Industries

OEM Industries KDE0506PTV2 60mm Maglev 3-pin CPU cooler

SKU CH-5WJR-729PS

A 60mm maglev fan with a 3-pin connector runs at 5V and 1.1W for quiet CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 5 V 1.1 W power draw keeps energy use low
  • 60 mm frame fits compact CPU cooler builds
  • 3-pin connector enables straightforward motherboard control
  • 25 mm thickness suits standard 6025 mounting slots

Compact 60 mm Maglev fan

This 60 mm cooling fan uses a maglev bearing and a 3-pin power connector. It runs on 5 V power and draws 1.1 W. The unit measures 60 by 60 by 25 mm and has no LED lighting. It is sold as a fan only, not a complete heatsink assembly.

Suits tight spaces and low-voltage headers

Builders working in compact chassis or on boards with 5 V 3-pin fan headers can use this fan. It is not suited for systems that require PWM speed control via a 4-pin connector. Buyers needing a full CPU cooler with heatsink and mounting hardware should look at a different product.

Maglev bearing for reduced friction

The maglev bearing lowers mechanical friction compared with conventional sleeve or ball bearings. This can extend service life and reduce noise at a given speed. The 3-pin connector provides voltage-based speed control only.

特長

  • Maglev bearing reduces friction for quieter operation
  • 5 V 1.1 W power draw keeps energy use low
  • 60 mm frame fits compact CPU cooler builds
  • 3-pin connector enables straightforward motherboard control
  • 25 mm thickness suits standard 6025 mounting slots

仕様

ModelKDE0506PTV2
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 60 mm Maglev fan fit alongside my existing 6025 cooler without clearance issues?

The fan measures 60 x 60 x 25 mm, matching the standard 6025 footprint, so it should occupy the same space as your current cooler.

How can I verify the 5 V 1.1 W Maglev fan is running correctly after installation?

Connect the 3-pin header, power the system, and confirm the fan spins smoothly; the Maglev bearing should operate quietly with no wobble.

Does the KDE0506PTV2 package include mounting screws or a 3-pin-to-4-pin adapter, or must I buy them separately?

The box contains only the 60 mm Maglev fan with a 3-wire 3-pin connector; screws and any adapter cables are not included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。