暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 92mm square server fan with 3-wire connector

OEM Industries

OEM Industries KLDC24B4S 92mm 24V 3.5W 3-Wire CPU cooler

SKU CH-AM8P-EFTGR

92 mm ball-bearing fan runs on 24 V at 3.5 W with a 3-wire connector for server cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • LEDNo
  • 24 V operation suits server and industrial chassis
  • 92 mm square frame fits 90 mm fan mounts
  • Ball bearing rated for continuous duty cycles
  • 5 W draw keeps power budgets low
  • Three-wire connector enables speed monitoring

Product identity

OEM Industries KLDC24B4S is a 92 mm square, 38 mm thick DC brushless fan rated for 24 V and 3.5 W. It uses a ball-bearing motor and a three-wire power connector without LED lighting. The unit is supplied new and intended as a replacement or integration component for server and industrial chassis.

Target use

Suits 24 V rack-mount servers, industrial enclosures and inverter cooling slots that accept a 92 mm footprint. Not for standard desktop motherboards or laptop cooling assemblies that operate on different voltages. Builders needing PWM speed control or a larger frame should consider other options.

Deciding spec

The 24 V operating voltage is the single specification that determines fit; the cooler will only function in systems that provide a 24 V DC fan header or equivalent power source.

特長

  • 24 V operation suits server and industrial chassis
  • 92 mm square frame fits 90 mm fan mounts
  • Ball bearing rated for continuous duty cycles
  • 5 W draw keeps power budgets low
  • Three-wire connector enables speed monitoring

仕様

ModelKLDC24B4S
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeBall
Power Connector3 Wires
LEDNo

この商品に関する質問

Does this 92mm fan need a 24 V three-wire header to run?

Yes — it draws 0.14 A at 24 V and uses a three-wire connector, so the header must supply 24 V DC.

Will the 92 mm frame fit the same mounting holes as my existing 9232 server fan?

The housing measures 92×92×38 mm, matching the standard 9232 footprint used in many 1U servers.

How can I confirm the ball-bearing fan is spinning at the correct speed after install?

The third wire carries a tachometer signal; plug it into a monitoring header and verify RPM in BIOS or hardware software.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。