暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 92mm square CPU cooling fan with two-wire connector

OEM Industries

OEM Industries M34709-55 92mm 12V .5A 2-pin CPU cooler

SKU CH-9BR8-XSH24

A 92 mm square cooling fan with a 12 V .5 A two-wire connector for CPU air cooling

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Power Connector2 Pin
  • LEDNo
  • Compact 92 mm frame fits tight builds
  • NIDEC 9225 motor delivers reliable airflow
  • 12 V .5 A draw keeps power use low
  • Two-wire 2-pin connector enables simple install
  • Fan-only design suits custom heatsink setups

Compact 92 mm square fan

This 92 mm square cooling fan from NIDEC carries model M34709-55 and runs on 12 V at .5 A through a 2-pin connector. It is supplied as a fan only, without LED lighting, in a black finish. The unit suits repair work or custom builds that need a direct replacement for the same form factor.

For maintenance and tight builds

Technicians replacing a failed NIDEC 9225 in existing hardware will find the correct voltage, current and connector match here. Builders who need PWM speed control, a 3-pin or 4-pin header, or an integrated heatsink should look elsewhere because this is a bare 2-wire fan.

2-pin power connector decides fit

The 2-pin connector supplies fixed 12 V power without a tachometer or PWM signal. If the motherboard or controller header expects a 3-pin or 4-pin plug, this fan will not provide speed feedback or variable control. Match the connector type before ordering.

特長

  • Compact 92 mm frame fits tight builds
  • NIDEC 9225 motor delivers reliable airflow
  • 12 V .5 A draw keeps power use low
  • Two-wire 2-pin connector enables simple install
  • Fan-only design suits custom heatsink setups

仕様

ModelM34709-55
ColorBlack
TypeFan only
Fan Size92mm
Power Connector2 Pin
LEDNo

この商品に関する質問

Will the 92mm M34709-55 fan fit the existing mounting holes on my older 92mm cooler bracket?

The fan uses a standard 92mm square frame, so it matches the common 92mm mounting pattern found on many legacy CPU coolers.

How can I verify the M34709-55 is running at the correct speed after installation?

Connect the 2-pin connector to a 12V header; the fan should spin smoothly and draw about 0.5A, which you can confirm in BIOS or monitoring software.

Does the M34709-55 package include mounting screws or a heatsink, or must I supply them?

The box contains only the 92mm NIDEC 9225 fan with 2-wire lead; screws, heatsink and any adapter cables are not included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。