暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 4-pin VGA cooling fan with ball bearing

OEM Industries

OEM Industries PLA07015D12HH-1 12V .3A 4-pin VGA fan

SKU CH-HYR2-S0F0M

12 V, 0.3 A ball-bearing fan with a 4-pin connector for graphics card cooling

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 12 V .3 A power draw keeps GPU temperatures low
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables precise PWM speed control
  • 7015 form factor fits standard graphics-card coolers
  • Black frame blends with most build aesthetics

Compact graphics-card cooler for targeted GPU

The OEM Industries PLA07015D12HH-1 is a 12V 0.3A 4-pin fan designed to mount directly on a graphics card heatsink. It suits builders who need a replacement cooler for a specific VGA model or who are assembling a custom loop and want a dedicated exhaust fan. The unit ships new and contains only the fan assembly.

Ball-bearing motor with standard PWM connector

A dual-ball bearing supports continuous operation at 12 volts while the four-wire PWM header allows the graphics card BIOS to modulate speed automatically. The black frame carries no LEDs, so the cooler stays visually neutral inside any chassis. No additional adapters or controllers are required for installation.

Direct drop-in for worn or missing OEM VGA fans

This cooler replaces a failed original fan on compatible graphics cards, restoring factory thermal performance without modifying the heatsink. The upgrade is worth it when the original bearing has become noisy or when the card throttles under load because the stock fan no longer spins freely. Buyers who need a different voltage, a larger frame or RGB lighting cannot use this model.

特長

  • 12 V .3 A power draw keeps GPU temperatures low
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables precise PWM speed control
  • 7015 form factor fits standard graphics-card coolers
  • Black frame blends with most build aesthetics

仕様

ModelPLA07015D12HH-1
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

この商品に関する質問

What does the 4-pin connector on the PLA07015D12HH-1 actually control?

The 4-pin connector carries 12V at .3A and provides PWM speed control plus a tachometer signal so the graphics card can regulate the fan speed precisely.

What mounting pattern does the PLA07015D12HH-1 use to attach to a graphics card heatsink?

The fan follows the 7015 form factor, meaning it has a 70 mm square frame with standard corner screw holes that match common VGA cooler shrouds.

How do you install the PLA07015D12HH-1 without damaging the ball bearing?

Hold the fan by its frame, align the four mounting holes with the heatsink, and tighten the screws evenly in a cross pattern; do not press on the centre hub or spin the blades by hand during installation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。