暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square DC brushless fan with three wires and a three‑pin connector

OEM Industries

OEM Industries PLA09215S12H CPU cooler 12V .55A 3 pin HD4890

SKU CH-VGWR-62R56

A 12 V DC brushless fan with a three-pin connector designed for the HD4890 video card

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • LEDNo
  • DC brushless motor runs quietly at 12 V .55 A
  • 3-pin connector fits standard motherboard headers
  • Sleeve bearing keeps friction low for steady airflow
  • Designed for HD 4890 video card cooling
  • Compact fan-only unit installs in tight chassis spaces

Replacement cooler for HD 4890

This 12 V 0.55 A sleeve-bearing fan is built as a direct drop-in for the reference HD 4890 graphics card. It uses a three-pin connector and runs without LEDs, keeping the original thermal profile intact. The black finish matches the stock shroud so the card looks unchanged once fitted.

Check clearance and power header

Measure the space around your HD 4890 heatsink to confirm a 92 mm frame will seat without fouling nearby components or the case side panel. Verify the board still supplies a working three-pin header at 12 V; a four-pin PWM header will run the fan but speed control will be limited to voltage mode. Ensure the existing mounting holes line up with the cooler’s screw pattern before ordering.

Swaps the original reference blower

This unit replaces the factory cooler that shipped with the HD 4890 when that cooler has failed or become noisy. The upgrade is worthwhile when the card still meets your performance needs but the original fan has seized bearings or rattles. It is not suited for builds that need higher static pressure for aftermarket heatsinks or for cards other than the HD 4890 reference design.

特長

  • DC brushless motor runs quietly at 12 V .55 A
  • 3-pin connector fits standard motherboard headers
  • Sleeve bearing keeps friction low for steady airflow
  • Designed for HD 4890 video card cooling
  • Compact fan-only unit installs in tight chassis spaces

仕様

ModelPLA09215S12H
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector3 Pin
LEDNo

この商品に関する質問

What comes in the box with the PLA09215S12H cooler?

The package contains the DC brushless fan unit with its 3-pin power connector already attached. No mounting brackets, thermal compound or additional cables are included.

Which version of this cooler matches my HD4890 video card?

The PLA09215S12H is built specifically for the HD4890; its 12 V 0.55 A rating and 3-pin connector match that card's original cooler specification.

What does the 12 V 0.55 A rating mean once the cooler is installed?

It draws 0.55 A from the graphics card's 12 V fan header, giving the brushless motor the power it needs to spin at its rated speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。