暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 97mm ball-bearing fan with three-pin connector

OEM Industries

OEM Industries PMB1297PYB1-AY 97mm Ball Bearing Fan 12V .7A 3-Pin

SKU CH-0XSA-5BMH2

97mm ball-bearing CPU cooler fan runs at 12V and 0.7A with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size97mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Dual ball bearing extends service life
  • 97 mm frame fits compact CPU coolers
  • 12 V .7 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black finish blends with dark builds

97mm Ball Bearing CPU Fan

The OEM Industries PMB1297PYB1-AY is a 97mm ball bearing fan designed for CPU air cooling. It suits builders replacing a noisy or failed cooler fan in a compact tower or proprietary chassis. The three-pin connector provides direct voltage control without PWM complexity.

12V .7A Power Draw and Airflow Headroom

Operating at 12V with a .7A current rating, the fan delivers steady airflow for low-to-mid TDP processors. It handles typical office workloads and light gaming thermals. Sustained heavy compute loads may exceed its cooling capacity.

3-Pin Mounting and Clearance Fit

The 97mm frame matches legacy Intel and AMD reference coolers using three-pin headers. No LED lighting keeps the build neutral. Builders must verify screw-hole spacing and shroud clearance before installation.

特長

  • Dual ball bearing extends service life
  • 97 mm frame fits compact CPU coolers
  • 12 V .7 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Black finish blends with dark builds

仕様

ModelPMB1297PYB1-AY
ColorBlack
TypeFan only
Fan Size97mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 97mm frame and 3-pin connector fit the mounting holes and header on my older motherboard?

The fan uses a standard 97mm square frame and a 3-pin power connector, matching the mounting pattern and header found on most legacy boards.

How can I confirm the dual ball bearing motor is spinning correctly after installation?

Connect the 3-pin header, power on the system, and verify the fan rotates smoothly at 12V .7A; the tachometer wire reports RPM in BIOS or monitoring software.

Does the package include mounting screws or a 3-pin to 4-pin adapter, or must I buy them separately?

The box contains only the PMB1297PYB1-AY fan unit; mounting screws and any connector adapters are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。