暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 80mm maglev CPU fan with 24V two-wire connector

OEM Industries

OEM Industries PMD2408PTV3-A 80mm Maglev CPU Cooler

SKU CH-ZVNZ-33FYG

Square 80 mm maglev fan cooler runs on 24 V with a two-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeMaglev
  • LEDNo
  • Maglev bearing reduces friction for quieter long-term operation
  • 80 mm square frame fits tight chassis layouts
  • 24 V two-wire power simplifies server wiring
  • 25 mm thickness balances airflow and clearance
  • SUNON engineering targets reliable continuous cooling

OEM Industries 80 mm Maglev Fan

The OEM Industries PMD2408PTV3-A is an 80 mm square cooling fan that uses a maglev bearing for reduced friction. It operates on a 24 V two-wire supply and carries the SUNON 8025 designation. The unit is sold new in black and consists of the fan only without integrated heatsink or lighting.

Suitable Applications and Limits

This fan suits maintainers replacing an identical 24 V two-wire maglev cooler in industrial or embedded systems. Buyers who need a complete tower cooler with heatsink and heatpipes should look elsewhere. Systems that provide only lower-voltage headers or PWM speed control cannot drive this fan directly.

Deciding Specification

The defining specification is the 24 V two-wire power requirement combined with the 80 mm maglev motor. Verify that your equipment supplies exactly this voltage and connector type before purchase.

特長

  • Maglev bearing reduces friction for quieter long-term operation
  • 80 mm square frame fits tight chassis layouts
  • 24 V two-wire power simplifies server wiring
  • 25 mm thickness balances airflow and clearance
  • SUNON engineering targets reliable continuous cooling

仕様

ModelPMD2408PTV3-A
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeMaglev
LEDNo

この商品に関する質問

What mounting holes does the 80 mm square cooler use?

The 80 mm square frame matches the standard 8025 hole pattern for direct screw mounting on compatible sockets.

How is the 24 V two-wire fan connected during installation?

Plug the two-wire lead into a 24 V fan header or the supplied inverter converter; reversing the wires will prevent the maglev fan from spinning.

When should the maglev bearing fan be replaced?

Replace the fan if the maglev bearing develops audible noise, vibration or the rotor stops spinning freely.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。