暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC registered DIMM modules 288 pin 128GB total

OWC

OWC 128GB (2x64GB) DDR4 2933 CL21 ECC Registered DIMM memory upgrade

SKU CH-M7M3-7ZG4W

128 GB of DDR4 2933 ECC registered memory in a 2 x 64 GB kit for HP SimpliVity 325 Gen10 servers

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB (2 x 64GB)

  • 128 GB total capacity with two 64 GB modules for high-density server workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 2933 CL21 at 1.2 V delivers rated speed with standard voltage efficiency
  • 288-pin RDIMM form factor fits HP SimpliVity 325 Gen10 memory slots directly
  • Backward compatible with 2133, 2400 and 2666 MHz systems for flexible deployment

HP SimpliVity 325 Gen10 upgrade

This 128GB kit consists of two 64GB DDR4 2933 ECC registered DIMMs built for the HP SimpliVity 325 Gen10. Each module runs at 1.2V with CL21 latency and a 2Rx4 organisation. The registered design adds a buffer for signal integrity in multi-DIMM server configurations.

Replaces HP part numbers 19045 and 00930 series

The kit substitutes HP part numbers including P19045-K21, P19045-B21, P00930-H21 and related SKUs. It is also backward compatible with 2133, 2400 and 2666MHz bus speeds, so it can fill slots in systems originally populated with slower modules. The upgrade is worth it when the platform requires registered ECC memory and the existing capacity limits virtual-machine density or in-memory database performance.

128GB total capacity for dense workloads

Two 64GB modules deliver 128GB of ECC protected memory, supporting large virtualisation clusters, heavy container deployments and memory-intensive analytics. The registered architecture scales across all populated channels without signal degradation. Buyers who need load-reduced DIMMs, unbuffered ECC, or capacities beyond 128GB per two-module kit cannot use this product.

特長

  • 128 GB total capacity with two 64 GB modules for high-density server workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 2933 CL21 at 1.2 V delivers rated speed with standard voltage efficiency
  • 288-pin RDIMM form factor fits HP SimpliVity 325 Gen10 memory slots directly
  • Backward compatible with 2133, 2400 and 2666 MHz systems for flexible deployment

仕様

BrandOWC
Part Number2R9D42R4128P
Capacity128GB (2 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP SimpliVity 325 Gen10

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 288-pin DDR4 ECC registered DIMM fit the HP SimpliVity 325 Gen10 memory slots?

Yes, the 288-pin DDR4 ECC registered DIMM is built for the HP SimpliVity 325 Gen10 and matches its registered memory slot layout.

What is the correct way to install the two 64GB modules so the server recognises the full 128GB?

Populate the two modules in matching channel pairs as shown in the HP SimpliVity 325 Gen10 service guide; the step often missed is seating each DIMM until both ejector clips click.

When should the ECC registered DIMMs be replaced if correctable error counts start rising?

Replace the modules when the system management log shows a sustained increase in correctable ECC errors, indicating cell wear on the 2Rx4 DDR4 2933 chips.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。