暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 ECC registered DIMM module with black chips

OWC

OWC 128GB DDR4 2933MHz CL21 ECC Registered 288pin DIMM memory upgrade

SKU CH-S15F-VDK00

128GB DDR4 2933MHz ECC registered DIMM for Supermicro X11 server motherboards

  • Capacity128GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB

  • 128GB capacity expands server memory headroom
  • DDR4 2933MHz CL21 speed matches platform specs
  • ECC registered design protects data integrity
  • 2V operation reduces power draw
  • Validated for Supermicro X11 series motherboards

128GB DDR4 ECC Registered DIMM

This 128GB DDR4 2933MHz CL21 ECC Registered 288-pin DIMM is built for Supermicro X11 server and workstation boards including X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T. It operates at 1.2V with a 4Rx4 organisation and replaces Supermicro part numbers MEMDR412LSL01ER29 and MEM-DR412MH-ER29. Buyers upgrading standard desktop systems or needing unbuffered memory cannot use this module.

Thermals and power profile

The module runs at the standard DDR4 1.2V without a heat spreader, relying on chassis airflow for cooling in 1U or 2U server enclosures. Registered buffering and ECC logic add minimal overhead, keeping power draw predictable for dense multi-DIMM configurations. No active cooling or additional voltage headroom is required for rated 2933MHz operation.

Compatibility and upgrade impact

Backward compatibility with 2133MHz, 2400MHz and 2666MHz buses lets the DIMM slot into existing Supermicro platforms without BIOS updates. ECC registered operation enables error correction and signal integrity for mission-critical workloads, while the 4Rx4 density maximises capacity per slot. The module is JEDEC and RoHS compliant and cannot be mixed with unbuffered memory in the same system.

特長

  • 128GB capacity expands server memory headroom
  • DDR4 2933MHz CL21 speed matches platform specs
  • ECC registered design protects data integrity
  • 2V operation reduces power draw
  • Validated for Supermicro X11 series motherboards

仕様

BrandOWC
Part Number2R9D44R4128G
Capacity128GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DSN-TS
Supermicro Motherboard X11OPi-CPU
Supermicro Motherboard X11QPH+
Supermicro Motherboard X11QPL
Supermicro Motherboard X11SPA-T

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288pin DDR4 ECC RDIMM into a Supermicro X11 motherboard, and what step is often missed?

Align the notch on the 288pin module with the slot key, press firmly until both clips snap shut, and verify the BIOS detects 2933MHz CL21 operation; the step often missed is confirming the memory mode is set to registered ECC in the firmware.

What maintenance or replacement will this 128GB 4Rx4 module need later?

No periodic maintenance is required; replacement is only needed if a module fails, at which point the limited lifetime warranty covers an advanced replacement of the same 128GB DDR4 2933MHz CL21 part.

What limit appears first when this CL21 1.2V registered DIMM runs sustained workloads?

The CL21 latency at 2933MHz is the primary timing constraint under sustained load; the registered buffer adds one cycle, so throughput caps at the JEDEC PC4-23400 rate before thermal or voltage limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。