暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 128GB DDR4 2933MHz CL21 ECC Registered RDIMM 288pin memory upgrade

SKU CH-ZZPW-BSS7C

128 GB DDR4 2933 MHz ECC registered RDIMM for Supermicro X11DPF and X11DPG server boards

  • Capacity128GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB

  • 128 GB capacity supports large workloads
  • ECC Registered design protects data integrity in servers
  • DDR4 2933 MHz CL21 delivers rated throughput
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU, X11DPG-QT

128 GB DDR4 ECC RDIMM for Supermicro X11

This 128 GB DDR4 2933 MHz CL21 registered DIMM is built for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU and X11DPG-QT motherboards. It targets server and workstation administrators who need maximum capacity per slot with error-correcting registered memory.

Verify registered ECC support

Your motherboard must accept DDR4 288-pin registered ECC modules and allow 4Rx4 organisation at the intended speed. This memory cannot be mixed with unbuffered DIMMs and will not function in standard desktop platforms that lack registered ECC support.

Low-voltage operation reduces thermal load

Rated at 1.2 V, the module runs within standard DDR4 power limits for registered server memory. No heat spreader is fitted, so airflow across the DIMM slots should be maintained according to the chassis and motherboard design guidelines.

特長

  • 128 GB capacity supports large workloads
  • ECC Registered design protects data integrity in servers
  • DDR4 2933 MHz CL21 delivers rated throughput
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DPFR-S, X11DPFR-SN, X11DPG-HGX2, X11DPG-OT-CPU, X11DPG-QT

仕様

BrandOWC
Part Number2R9D44R4128G
Capacity128GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPFR-S
Supermicro Motherboard X11DPFR-SN
Supermicro Motherboard X11DPG-HGX2
Supermicro Motherboard X11DPG-OT-CPU
Supermicro Motherboard X11DPG-QT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What is included with the 128GB DDR4 2933MHz ECC RDIMM and what must be purchased separately?

The module itself is supplied. No heat spreader, cables or additional components are included. Extra DIMMs for multi-channel configurations must be bought separately.

Which capacity or version of this registered ECC memory should I choose for my Supermicro X11DPG-HGX2?

This part is a single 128GB 4Rx4 registered DIMM. Select it when you need maximum density per slot; choose lower-capacity registered ECC modules if your budget or slot count requires smaller increments.

What does the 2933MHz rating mean once the DIMM is installed in a compatible server motherboard?

The module will run at up to 2933MHz CL21 at 1.2V. On boards limited to 2666MHz, 2400MHz or 2133MHz it will automatically down-clock to the highest supported speed while retaining ECC and registered operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。