暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR5 ECC RDIMM module, no heat spreader

OWC

OWC 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC Registered RDIMM memory upgrade

SKU CH-QBAD-H40F4

A 128 GB DDR5 4800 CL40 ECC registered RDIMM for Dell PowerEdge C6600, C6620, MX760C, R660 and R6615 servers

  • Capacity128GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 128GB

  • 128 GB capacity fits Dell PowerEdge C6600, C6620, MX760C, R660 and R6615 servers
  • ECC registered design detects and corrects single-bit errors for data integrity
  • DDR5 4800 PC5-38400 CL40 speed meets JEDEC spec for registered DIMMs
  • 1 V operation lowers power draw versus previous DDR generations
  • 4Rx4 288-pin RDIMM form factor slots directly into compatible server memory channels

Server memory upgrade

This OWC 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC Registered RDIMM is built for Dell PowerEdge C6600 C6620 MX760C R660 R6615 servers. It delivers 128GB of registered ECC capacity in a single module for workloads that require error correction and high density. The module is not compatible with standard desktop computers or unbuffered memory configurations.

Registered ECC requirement

The single specification that decides fit is the registered ECC DDR5 4800 interface with 4Rx4 organisation at 1.1V. Only systems that accept registered ECC RDIMMs at this speed and rank layout can use the module; mixing with unbuffered or load-reduced DIMMs is not supported.

No bundled accessories

The upgrade ships as a standalone memory module without cables software or heat spreaders. Installation is a direct DIMM swap so the only change is the added capacity and ECC protection for the supported Dell PowerEdge platforms.

特長

  • 128 GB capacity fits Dell PowerEdge C6600, C6620, MX760C, R660 and R6615 servers
  • ECC registered design detects and corrects single-bit errors for data integrity
  • DDR5 4800 PC5-38400 CL40 speed meets JEDEC spec for registered DIMMs
  • 1 V operation lowers power draw versus previous DDR generations
  • 4Rx4 288-pin RDIMM form factor slots directly into compatible server memory channels

仕様

BrandOWC
Part Number4R8D54R4128G
Capacity128GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C6600
Dell PowerEdge C6620
Dell PowerEdge MX760C
Dell PowerEdge R660
Dell PowerEdge R6615

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the 4800 MT/s speed translate to bandwidth inside a Dell PowerEdge R660?

The module runs at DDR5-4800 with a CL40 latency, delivering PC5-38400 peak transfer rates when the server's memory controller is configured for that speed.

What does the 288-pin ECC Registered RDIMM form factor require from the system board?

It needs a 288-pin DDR5 RDIMM slot that supports registered ECC modules; it will not work in unbuffered or load-reduced slots.

What physical clearance does the 128 GB 4Rx4 module need in a Dell PowerEdge MX760C chassis?

The module is a standard-height 288-pin RDIMM without a heat spreader, so it fits in the regular DIMM sockets of the listed PowerEdge servers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。